Dell Guide to Installing and Removing Drivers for E520 Models

Removing and Installing Parts: Dell Dimension E520 Service Manual

1 drive release latch 2 sliding plate 3 CD/DVD drive

Installing a CD/DVD Drive

1.Follow the procedures in Before You Begin.

2.Remove the computer cover (see Removing the Computer Cover).

3.If you are installing a new drive, unpack the drive and prepare it for installation.

Check the documentation that accompanied the drive to verify that the drive is configured for your computer.

4.If you are installing a new drive, remove the drive panel insert (see Removing the Drive-Panel Insert), then remove three shoulder screws from the inside of the drive-panel insert and attach the screws to the new drive.

5.Slide the drive into the drive bay until the drive clicks into position.

file:///T/htdocs/systems/dimE520/en/SM_EN/parts.htm[10/16/2012 1:05:24 PM]