3-3 Power Supply
●Slide the lens cover to the left to turn on the camera.
●Slide the lens cover towards the right to turn off the camera.
●Use the lens cover to turn the camera on and off. After
turning on the camera, the red busy LED blinks, then the last recorded image appears on the LCD monitor.
※Auto Power Off: If the camera is idle for one minute, the
power is turned OFF to prevent battery drain. Press the Display Mode Button to restart the camera.
※The following features are automatically saved before
turning off the camera unless you select "Reset Default" to restore the factory settings.:
1.Resolution
2.Quality
3.OSD Language
4.White Balance
5.EV Compensation
6.
7.Light Frequency
8.PC Mode
3-4 Shutter Button
●This camera is designed for a
set of yellow brackets "[ ]" appears in the center of the LCD monitor when the Shutter button is pressed and held half way down. At this point the camera is metering to calculate the exposure. Fully depress the Shutter button and the camera will beep to indicate a shot is being taken.
8