Chapter 6: Getting Started
6-1 Setup Mode 
In Setup Mode, you can adjust the camera’s basic functions, including Image Size, Image Quality,
1. Turn the Mode Dial 
to Setup Mode 
.
2. Turn on the camera. The red LED will blink, and then the setup screen will show on the LCD monitor.
3. Press the arrow button 
/ 
on the
Button |
| to move and select the menu items. |
|
4. Press the arrow button 
on the 
to enter the selected menu items.
5.Press the arrow button 
on the 
to return the previous menu.
6-2 Record Mode 
Record Mode offers you a quick and easy way to take ideal pictures.
1.Turn the Mode Dial 
to Record Mode 
.
2.Turn on the camera. The last recorded image appears on the LCD display.
3.Press and hold the Shutter button halfway down. The camera will process the exposure settings and yellow brackets "[ ]" will appear in the center position of LCD monitor. Continues to press and hold the Shutter button halfway down to keep the same value. Press the
Shutter button down fully and you will hear two beep sounds, one low beep and one high beep. Hold the camera steady until after the two beeps.
4. When taking a picture, you can press the Flash Button
to set the desired flash modes: Auto,
5.Press the Display Mode Button 
to choose your desired LCD display mode. There are five display modes: Standard Display, Full Display, Image Only, LCD Monitor Off, and Only Operation Settings.
6.Use the 
to set the detailed settings for recording images, e.g., Image Resolution, Image Quality, 
button on the center of the 
/ 
/ 
/
on the 
to move to, and Enter to select, the desired menu items.
7. Press the arrow buttons 
/ 
on the
Button 
to adjust the digital zoom and a zoom indicator appears on the left side of the LCD Monitor.
8.Slide the Macro Button downwards to enable Macro
When you select the Macro Mode, the green Macro LED located on the top of the LCD monitor will light up.
※If the low battery power icons appears on the LCD
Monitor, replace the batteries immediately to keep the camera operating normally.
20