First Alert DWIP-720 user manual Camera Display Menu, Device Network Menu

Menus (continued)

Camera Display Menu:

Options to change settings and adjust the camera view can be accessed by either right-clicking or left-clicking on the camera display. The functions of the two menus are explained at right.

PROGRAM FUNCTIONS

MENUS

•Left Click Menu

1 2 3 5 6 7 8

4

•Right Click Menu (on camera video)

9

5

7

8

10 11

1.Return: Close the menu.

2.Listen: Turn on camera microphone. Click again to turn off.

3.Talk: Turn on camera speaker. Click again to turn off.

4.+/-:used for camera zoom.

5.PTZ Directional Control: Click to pan or tilt the camera.

6.Capture: Take a photo.

7.(Begin) Record: Start video/audio recording.

8.More: Select to adjust camera settings.

9.Close: Close the Camera display.

10.Motion Detection Area: Adjust the area of view for motion detection.

11.Full Screen: Enlarge camera display to fill whole monitor screen.

Device Network Menu:

Options to change settings for the device network connections can be adjusted by right-clicking on the device name in the LAN/WAN display. The functions of the menu is explained at right.

1.H264/MPEG4 Player: Stream via H264/MPEG4.

1 2. Sub-stream Player: Stream via

2sub-stream protocol.

3.Close H264/MPEG4 / Close

		3		Sub-stream:Turn off feed.
4			4. Add Device: Click to add an
				additional camera.
5			5.	Create a Group: To create
6				camera groups, more than one
				camera required.
	7		6.	Change Access Password:
				Select to change the access
	8
				password. If 5 digit password was
				used on initial Remove setup.

9Adding the 4 digit access password will allow Remove viewing.

7.Change the Device Alias: Select to Remove your camera (i.e. front door, kitchen).

8.Micro-SD Card Query: Select

to manage micro-SD card files and directories.

9.Remove Device: Remove device from list.

Page 9