FujiFilm 7025227 manual Processing Laboratory Handling, Processing and Printer Conditions

Page 4

FUJIFILM PRODUCT INFORMATION BULLETIN • FUJICOLOR QuickSnap Marine

5. PROCESSING LABORATORY HANDLING

Basic handling procedures are no different from those for other 35 mm films.

Since FUJICOLOR QuickSnap Marine is designed to use the "00" "0" & "E" frames for image exposures, it is important to exercise caution relative to the film leading end.

Film Cartridge Design

The basic color is green.

6.POINTS PERTINENT TO CONTINUOUS REEL, HANGER AND MINILAB PROCESSING

The procedures used for film tongue extraction, cutting and check tape application are almost the same as for QuickSnap Super. Follow the handling method shown in 1 to 3 below.

The film extraction length, leading end cut length and check tape length all together, must be no longer than 120 mm. The film should not be extracted from the cartridge beyond 120 mm.

7. PROCESSING AND PRINTER CONDITIONS

7-1 Processing Conditions

Process the film with CN-16, CN-16Q, CN-16FA, CN-16L, CN-16S, C-41 or equivalent process- ing chemicals.

7-2 Automatic Printer Conditions

Use the same channel setting as for SUPERIA X-TRA 800.

8. PARTS RECYCLING

In line with Fujifilm's efforts to protect the environment, photofinishers are kindly urged to send the used camera bodies and waterproof cases to Fujifilm for recycling.

NOTICE The data herein published were derived from materials taken from general production runs. However, as Fujifilm is constantly upgrading the quality of its products, changes in specifications may occur without prior notice.

FUJI PHOTO FILM CO., LTD.

26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan

– 4 –

Ref. No. AF3-147E(EIGI-03.1-HB•1-1¸) Printed in Japan

Image 4
Contents Features IntroductionFujicolor QuickSnap Marine SpecificationsSize Handling Procedures for Laboratory Processing Opening the Waterproof Housing and Removing the Main UnitProcessing and Printer Conditions Processing Laboratory HandlingParts Recycling