FujiFilm A200 manual Camera strap, you may not be able to obtain, Subject in the frame, Viewfinder

QMODE TAKING PICTURES (AAUTO MODE)

3	4	４９
		１Ｍ

			LCD monitor
	Take care to hold the camera so that your
	fingers or the strap do not cover the lens, flash
	or flash control sensor. If the lens, flash or flash
	control sensor is obscured by your fingers or the
	camera strap, you may not be able to obtain the
	correct brightness (exposure) for your shot.
	●! There may be some unevenness in the brightness at
			Viewfinder
	the lower edge of the LCD monitor. This is normal
	and does not indicate a fault. This does not affect	Use the LCD monitor or viewfinder to locate your
	the photographed image.
	●! Check that the lens is clean. If it is dirty, clean the	subject in the frame.
	lens as described on P.100.	●! To frame your shot precisely, you should take the
	●! If you use the flash in very dusty conditions or when	picture using the LCD monitor.
	it is snowing, white dots may appear in the image	●! In some conditions it may be difficult to see your subject
	due to the flash reflecting off the dust particles or	clearly on the LCD monitor. (Such as in sunny weather
	snowflakes. Try taking the shot with the flash	outdoors or when you are shooting dimly lit scenes.) In
22 switched off.		such situations, use the viewfinder to take the shot.