FujiFilm A200 manual Use at PC-CAM mode, Slide the power switch to the side to turn the camera on

7.3 Use at PC-CAM mode

ＳＥＴ－ＵＰ

ＩＭＡＧＥ ＤＩＳＰＬＡＹ ＯＦＦ ＰＯＷＥＲ ＳＡＶＥ ＯＮ

ＵＳＢ ＭＯＤＥ ＰＣ ＣＡＭ ＤＡＴＥ／ＴＩＭＥ ＳＥＴ

ＯＫ ＢＡＣＫ

Plug the AC power adapter connector into the DC IN 3V socket on the camera and then plug the adapter itself into the main power outlet.

1.Slide the power switch to the side to turn the camera on.

2.Set the “USB MODE” setting in the “SET–UP” menu to “PC CAM” (➡P.64, 65).

3.Slide the power switch to the side to turn

the camera off.

(Special USB)
socket
Camera	USB	PC
AC power adapter	socket

✽ Sold separately

4.Switch your PC on.

5.Use the special USB cable to connect the camera to your computer.

6.Switch the camera on.

If you are using a Windows PC, the driver settings are automatically specified when installation ends. Just wait a few moments.

Always use the prescribed procedure when disconnecting or switching off the camera (➡P.86).

✽ Take care to ensure that the special USB cable is	7
connected the correct way around and that the plugs

are pushed fully into the connection sockets.

✽Select Macro mode for close-up shots (➡ P.27).

Although the “E” icon is not displayed. 83