Fisher VCB-3424 instruction manual Specifications

Page 15

SPECIFICATIONS

Scanning system

: EIA standard (525 TV lines, 30

 

frames/sec.)

Interlace

: PLL 2:1 interlace

Image device

: 1/3 inch solid state image device CCD

Picture elements

: 542 (H) x 492 (V)

Effective picture elements

: 512 (H) x 492 (V)

Synchronizing system

: Line lock

Resolution

: 400 TV lines horizontally, 350 TV

 

lines vertically

Video output level

: 1.0 Vp-p/75 ohms, composite

Video S/N ratio

: More than 50 dB

Minimum required

: Approx. 0.07 lux with a F 1.2 lens,

illumination

approx. 0.1 lux with a F 1.4 lens

(incandescent lighting)

 

Backlight compensation

: Manual ON/OFF switching, zone light

 

measuring system

 

(Active when using an auto-iris lens)

Electronic iris function

: Manual ON/OFF switching

Mirror image

: Manual ON/OFF switching

Electronic iris range

: 0.07 lux to 42,000 (F 1.2, lens)

 

0.1 lux to 57,000 (F 1.4, lens)

Flange-back

: 12.5 mm ± 0.8 mm

Gamma correction

: γ = 0.45

Lens mount

: CS mount (or C mount with the

 

supplied adaptor)

Environmental conditions

: Temperature: –10˚C ~ +50˚C

 

Humidity: less than 90% (no

 

condensation)

Power supply

: 24 V AC, 60 Hz

Power consumption

: 2.3 W (with auto iris lens)

 

 

1.4 W (without auto iris lens)

Weight

 

: Approx. 330 g (without lens)

Dimensions

 

 

 

 

108.5

 

56

1.5

99.5

 

 

 

 

 

 

 

VIDEO OUT

POWER

 

 

45

 

 

 

LINE

 

 

 

PHASE

 

 

11

 

 

12

1/4”–20 UNC

28

22

 

 

 

Features and specifications are subject to change without prior notice or obligations.

SERVICE

This camera is a precision instruments and if treated with care, will provide years of satisfactory performance. However, in the event of a problem, the owner is advised not to attempt to make repairs or open the cabinet. Servicing should always be referred to your dealer or Sanyo Authorized Service Centre.

English 13

Image 15
Contents VCB-3424 English Features ContentsInformation to User For the customers in CanadaPour la clientèle canadienne Precautions Camera setup section under the cover Video output connector Video OUT BNC typeLine phase adjustment volume Line Phase Power indicator PowerLens mount cap Parts NamesVideo type auto-iris lens If using a Video type auto-iris lensConcerning auto-iris lenses DC type auto-iris lensMounting the Lens Remove the lens mount cap from the cameraMount type lens Rewiring the lens cable in the lens iris plug Flange-back adjustmentMounting the Lens Coaxial cable type and maximum length ConnectionsSettings Camera setup sectionElectronic iris function setting Mirror image setting SettingsLens iris adjustment Backlight compensation settingPicture is not clear TroubleshootingLine phase adjustment No picture on the monitor screenSpecifications