Fisher VCB-3424 instruction manual Connections, Coaxial cable type and maximum length

CONNECTIONS

1

24 V

3

(A)

24 V

2

Basic connection for monitoring or recording

The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately.

1Make the video signal connection between the camera and the monitor or time lapse VCR.

2Connect to 24 V AC UL listed class 2 power supply.

CAUTION:

•To prevent camera and/or power supply failure, pay close attention to polarity when making the connections.

•To prevent fire hazard any UL listed wire rated VW-1, should be used for the 24 V AC cable input terminal.

3Insert the plug of this power cord into a wall outlet.

The POWER indicator (A) will light. Adjust the picture on the monitor using the Brightness and Contrast controls.

Coaxial cable type and maximum length

•Cable type RG-59U (3C-2V), 250 m maximum.

•Cable type RG-6U (5C-2V), 500 m maximum.

•Cable type RG-11U (7C-2V), 600 m maximum.

CAUTION:

(Video signal connections)

: VIDEO IN : VIDEO OUT

•The RG-59U type cable should not be run through electrical conduits or through the air.

•Using CCTV/Video-grade coaxial cable.

English 9