Using IP surveillance Software (continued)
Reserved space – Indicates how many bytes should be reserved on the hard disk. If the recording data exceeds disk capacity, the new video data will replace the oldest date (IF the Cycle Recording box is checked). This space can be adjusted with the sliding bar below it.
Modulation Mode – For selecting the input signal format (NTSC for US use, or PAL that is used mostly in Europe).
Alert Sound – Select the sound file of your choice in Windows to play when there is an alert.
Display options – In each video frame, there are two status bars which contain Camera location, Connect time, Remote time and Record time. All of them can be individually enabled here.
Location (Channel number + Text on Video) | Remote Time |
|
Recording Time (day hour:min)
Connect Time (day hour:min)
| 0 day 00:15 |
1day 04:17 |
Backup Settings – Select the backup directory, the backup size of your media, and the backup locations. You can also delete backup locations here. The maximum locations cannot exceed 32.
Last Backup Time – Indicates the last time a backup occurred. All Backup means all the data in this location has been backed up, and No Data means there is no data stored in this location.
Internet Settings – Set the proxy and IP filters.
66