D-Link DCS-5300 Schedule with Time Picker, Select period, Once Every Hour Every Day Every Week

Using IP surveillance Software (continued)

Schedule with Time Picker

Remember to make the Begin Time earlier than the End Time. Otherwise the Add action will be ignored.

Select period

Once

Every Hour

Every Day

Every Week

After you have made your Begin Time and End Time selections, select a period. You may want to record only Once, or you may want to record Every hour, Every day, Every week or Every Month.

Add selected period	Erase selected
schedule	period schedule

When you choose Every Hour, the recording scheduler will be guided only by the minutes setting. Every hour recording will occur during the minutes that have been selected. (e.g., if the BeginTime was 2:20pm and the End Time was 7:40pm then the recording would be in effect from 20 mins past the hour to 40 minutes past the hour for every hour of the day.)

Similarly, if you choose Every day then only the hour and the minute setting will apply. If you choose Every week then only the day of the week, the hour and the minute settings are valid. For Every Month, only the date (excluding the month and year), the hour and the minute are valid settings.

77