Creative manual Installing Creative WebCam NX, Windows 98SE /Me/2000/ XP

Installing

Creative

WebCam NX

In Windows 98/

98SE /Me/2000/ XP

•You can install the WebCam with your computer turned on.

•The USB port(s) on your computer may be found on the front panel and/or the back panel.

•You can daisy-chain the WebCam through another USB device or attach the WebCam to a powered USB hub.

•If you have a microphone, connect it to computer’s microphone connector. Read your computer’s documentation.

Follow the installation procedures for your operating system.

1.Do not connect Creative WebCam NX to your computer before installing the drivers. If you accidentally begin installation with Creative WebCam NX connected, the Add New Hardware Wizard or Found New Hardware Wizard dialog box appears. Click the Cancel button.

2.Insert the Creative WebCam NX Installation CD into your CD-ROM drive. If it does not run automatically, click Start-> Run and type D:\ctrun\ctrun.exe (Where D:\ represents your CD-ROM drive).

3.Click the options for installing drivers and applications.

4.Follow the instructions on the screen to complete the installation.

You may be asked, after an application is installed, if you want to restart your computer. Select No until all the drivers and applications are installed.

Installing Creative WebCam NX 1-3