Nikon 25478B, D5100, 25476 Framing Photographs in the Monitor, Rotate the live view switch, Focus

Memory card access lamp

x

LivexView/Movies

Framing Photographs in the Monitor

Follow the steps below to take photographs in live view.

1 Rotate the live view switch.

The mirror will be raised and the view through the lens will be displayed in the camera monitor. The subject will no longer be visible in the viewfinder.

	Live view switch
2 Position the focus point.
Position the focus point over your subject as	Focus
described on page 47.	point

3 Focus.

Press the shutter-release button halfway. The

focus point will blink green while the camera focuses. If the camera is able to focus, the focus

point will be displayed in green; if the camera is unable to focus, the focus point will blink red (note that pictures can be taken even when the focus point blinks red; check focus in the monitor before shooting). Except in i and j modes, exposure can be locked by pressing the AE-L/AF-Lbutton.

4Take the picture.

Press the shutter-release button the rest of the way down. The monitor turns off and the memory card access lamp lights during recording. Do not remove the battery or memory

card or unplug the optional AC adapter until recording is complete. When shooting is

complete, the photograph will be displayed in the monitor for a few seconds or until the shutter-release button is pressed halfway. The camera will then return to live view mode. To exit, rotate the live view switch.

44