Yamaha HTR-6130 owner manual 12 En, Connecting to the Front a terminals

Page 16

Connections

■Connecting to the FRONT A terminals

2

1

Red: positive (+)

 

 

Black: negative (–)

 

3

1Loosen the knob.

2Insert the bare end of the speaker wire into the slit on the terminal.

3Tighten the knob to secure the wire.

Connecting the banana plug

(except Europe, Russia, Korea, and Asia models)

The banana plug is a single-pole electrical connector widely used to terminate speaker cables. First, tighten the knob and then insert the banana plug connector into the end of the corresponding terminal.

Banana plug

■Connecting to the FRONT B, CENTER, and SURROUND terminals

Red: positive (+)

Black: negative (–)

1Press down the tab.

2Insert the bare end of the speaker wire into the hole on the terminal.

3Release the tab to secure the wire.

Setting the speaker impedance (U.S.A. and Canada models only)

Caution

If you are to use 6 ohm speakers, set “SP IMP.” to “6ΩMIN” as follows BEFORE using this unit.

1Make sure this unit is turned off.

See page 19 for details about turning on or off this unit.

2Press and hold J TONE CONTROL and then press A STANDBY/ON to turn on this

unit.

This unit turns on, an the advanced setup menu appears in the front panel display.

3Press K PROGRAM l / h repeatedly to select “SP IMP.”.

The following display appears in the front panel display.

SP IMP.- 8 MIN

4Press L STRAIGHT repeatedly to select “6ΩMIN”.

The following display appears in the front panel display.

SP IMP.- 6 MIN

5Press A STANDBY/ON to confirm your selection and set this unit to the standby mode.

Note

The setting you made is reflected next time you turn on this unit.

12 En

Page 15 Page 17
Image 16
Page 15 Page 17
Contents HTR-6130 Important Safety Instructions FCC Information for US customers Example of Antenna GroundingPour LES Consommateurs Canadiens For Canadian CustomersSerial No Contents Features We Want You Listening For a LifetimeChecking the supplied accessories Installing batteries in the remote controlGetting started Asia and General models onlySet up your speakers Quick start guidePreparation Check the items Enjoy DVD playbackCenter and surround speakers Front speakersConnect the subwoofer cable to the input Make sure that this unit and the DVD For further connectionsPlayer are unplugged from the AC wall outlets Using the other Scene buttons Rotate H Volume to adjust the volumeAbout Scene function Check the type of the connected speakersWhat do you want to do with this unit? Rear panel ConnectionsName See Placing speakers 10 EnBefore connecting to the Speakers Terminal Connecting speakers11 En Connecting to the Front B, CENTER, and Surround terminals Connecting to the Front a terminals12 En Information on jacks and cable plugs 13 EnAudio jacks Video jacksInformation on Hdmi 14 EnHdmi jack and cable plug Hdmi cable plug15 En Connecting video componentsDVD player Connecting to the Hdmi or Component Video jacks Connecting to the Component Video jacks16 En Hdmi connectionConnecting audio components Connecting a CD player and a CD recorder/MD recorderConnecting to the Multi CH Input jacks 17 EnConnecting to the Video AUX jacks on the front panel 18 EnConnecting the FM and AM antennas Connecting the power cableTurning on and off the power 19 EnFront panel display 20 EnUsing the remote control 21 En1Infrared window 30ºSPEAKERS..5spk Basic setup22 En Press 7l/ h to select the desired setting Press Hmenu to exit from Basic SetupCHECKTestTone 23 EnSelecting the Scene templates Selecting the desired Scene templateD M o v i e V i e w D V i e w i n g25 En Which Scene template would you like to select?Preset Scene template descriptions 26 EnCustomizing the preset Scene Templates Creating your original Scene templates27 En Renaming the Scene templatesUsing remote control on the Scene feature Controlling the input source Components in the Scene mode28 En Scene buttonsGuide to contents PlaybackBasic operations V i e D r a m a t i cAdditional operations 30 EnSelecting the night listening mode Adjusting the tonal quality31 En Selecting audio input jacksAdjusting speaker levels during Playback Displaying the signal informationPress 4AMP and then press Hmenu on the remote control 32 EnUsing the sleep timer 33 EnPlaying video sources Background Audio sourcesCategory Program Features Sound field programsSound field program descriptions 34 En35 En Editing sound fields parameters36 En Enjoying unprocessed input sources Straight decoding modeTo deactivate the Straight mode, press FM/AM tuning Automatic tuningManual tuning AM 1440 kHzAutomatic preset tuning Manual preset tuningC3AM 630 kHz 38 EnSelecting preset stations Exchanging preset stationsPress and hold B PRESET/TUNING for more than 3 seconds E1FM 87.5 MHz40 En Using iPodAUX/DOCK Using Bluetooth components Pairing by using SET MenuQuick pairing 41 EnRecording 42 EnBasic setup Basic Setup Manual setup Manual SetupParameter Features Set menuUsing set menu Signal information Signal Info44 En 8RETURNSpeaker settings Aspeaker SET 45 En46 En Speaker level BSP Level100Hz 47 En48 En Audio settings Gaudio SETInput assignment Multi channel input setup DVD My DVD49 En BGV BGVDisplay settings Adisplay SET Bluetooth setting Ebluetooth50 En Parameter initialization DPARAM. INIRemote control features Controlling this unit, a TV, or other components51 En Controlling this unitRemote control Player/recor 52 EnControlling other components Digital TVSetting remote control codes Resetting all remote control codesRemote control code default settings 53 EnAdvanced setup Initializing Preset54 En Speaker impedance SP IMP A. and Canada models onlyTroubleshooting Problem Cause Remedy See55 En General56 En 57 En TunerBluetooth 58 EnIPod Status message Cause Remedy SeeRemote control Resetting the systemAdvanced setup menu appears in the front panel display 59 En60 En GlossaryAudio information 61 En Sound field program informationVideo information Cinema DSPSpecifications 62 En63 En IndexNumerics 64 En IPod connectedFront panel C D E F G H10 ENT List of remote control codes IiiCCE NEI TV/DVD TV/DVD/VCRTV/VCR VCRWN25960 HTR-6130 Front panel/Face avantRemote control/Boîtier de télécommande

HTR-6130 specifications

The Yamaha HTR-6130 is a versatile home theater receiver that embodies innovation and functionality, making it a popular choice for audio enthusiasts. Designed to deliver immersive surround sound experiences, it serves as the cornerstone for any home entertainment setup.

One of the standout features of the HTR-6130 is its robust audio output. With a powerful 5.1-channel configuration, it is equipped to handle up to 100 watts per channel, allowing users to enjoy dynamic sound reproduction whether they're watching a movie or listening to music. The receiver supports high-definition audio formats like Dolby TrueHD and DTS-HD Master Audio, ensuring that users experience sound the way the creators intended.

The HTR-6130 integrates multiple connectivity options, making it highly adaptable to various devices. It boasts four HDMI inputs and one output, supporting 4K pass-through, as well as a variety of legacy inputs including composite, component, and optical connections. This wide array of connectivity options enables integration with Blu-ray players, gaming consoles, and streaming devices with ease.

Yamaha has included its proprietary YPAO (Yamaha Parametric room Acoustic Optimizer) technology in the HTR-6130. This advanced feature automatically analyzes the room's acoustics and optimizes the speaker settings for the best sound experience. The result is a more balanced audio environment tailored to your specific space, enhancing the overall listening experience.

The receiver also has a user-friendly interface, featuring an intuitive on-screen display and remote control. This makes setup and operation straightforward, even for those who may not be tech-savvy. The HTR-6130 also supports a variety of audio formats, including MP3, WAV, and WMA, allowing users to play their favorite tunes with great clarity.

Another important aspect of the Yamaha HTR-6130 is its energy efficiency. The receiver is designed to consume less power without sacrificing performance, making it an eco-friendly choice for audiophiles.

In summary, the Yamaha HTR-6130 is an excellent home theater receiver that combines power, versatility, and advanced technology. With its high-quality audio output, extensive connectivity options, and smart optimization features, it offers an exceptional user experience, making it a solid choice for anyone looking to elevate their home entertainment system.
Top Page Image Contents