Yamaha HTR-6130 31 En, Selecting audio input jacks, Selecting the night listening mode

■Selecting audio input jacks

(AUDIO SELECT)

This unit comes with a variety of input jacks. Use this feature (audio input jack select) to switch the input jack assigned to an input source when more than one jacks are assigned to an input source.

y

•We recommend setting audio input jack select to “AUTO” in most cases.

•You can adjust the default audio input jack select of this unit by using “AUDIO SELECT” in “OPTION MENU” (see page 50).

Press O AUDIO SELECT (or press 4AMP and then CAUDIO SEL) repeatedly to select the

desired Audio input jack select setting.

DVR V-AUX DTV/CBL DVD MD/CD-R TUNER CD

	Audio input jack select setting
AUTO	Automatically selects input signals in the
	following order:
	(1)	Digital signals
	(2)	Analog signals
ANALOG	Selects only analog signals. If no analog
	signals are input, no sound is output.

Note

This feature is not available when no digital input jack are assigned to the currently selected input source.

■Selecting the night listening mode

The night listening modes are designed to improve listenability at lower volumes or at night.

1Press 4AMP and then press MNIGHT repeatedly to select “NIGHT:CINEMA” or “NIGHT:MUSIC”.

Choices: NIGHT:CINEMA, NIGHT:MUSIC, NIGHT OFF

•Select “NIGHT:CINEMA” to reduce the dynamic range of film soundtracks and make dialog easier to hear at lower volumes.

•Select “NIGHT:MUSIC” to preserve ease-of-listening for all sounds.

•Select “NIGHT OFF” if you do not want to use this feature.

y

When a night listening mode is selected, the NIGHT indicator lights up in the front panel display.

Playback

2Press 7l/ hto adjust the effect level while “NIGHT:CINEMA” or “NIGHT:MUSIC” is displayed in the front panel display.

Choices: MIN, MID, MAX

•Select “MIN” for minimum compression.

•Select “MID” for standard compression.

•Select “MAX” for maximum compression.

y

“NIGHT:CINEMA” and “NIGHT:MUSIC” adjustments are stored independently.

Notes

•You cannot use the night listening modes in the following cases:

–when the component connected to the MULTI CH INPUT jacks is selected as the input source.

–when headphones are connected to the PHONES jack.

–when the sampling frequency of the input sources are higher than 96 kHz.

•The night listening modes may vary in effectiveness depending on the input source and surround sound settings you use.

■Adjusting the tonal quality

Use this feature to adjust the balance of bass and treble for the front left and right speaker channels.

Press J TONE CONTROL repeatedly to select “BASS” or “TREBLE” and then press

KPROGRAM l/ hto adjust the corresponding frequency response level.

Control range: –10 to +10 dB

Control step: 2

• Select “BASS” to adjust the low-frequency response.

• Select “TREBLE” to adjust the high-frequency response.

Notes

•Speaker and headphone adjustments are stored independently.

•If you increase or decrease the high-frequency or low-frequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left and right speakers.

OPERATION BASIC

English

31 En