Samson manual Servo 260 Power, Contact

SERVO 260 POWER

A M P L I F I E R

CLIP

SAMSON

STUDIO AMPLIFIER 120 WATT STEREO

IDLE

∞MAX

CLIP

SERVO - 260

PROTECTION

IDLE

POWER

∞MAX

SERVO 260 STUDIO AMPLIFIER

FUSE	CAUTION	!
6A/250V	RISK OF ELECTRIC SHOCK
	DO NOT OPEN
	CAUTION

		HEATSINK MAY BE HOT!
		DO NOT BLOCK AIRFLOW
CAUTION ; REPLACE WITH		OR OVERHEATING MAY
THE SAME TYPE FUSE AS			OCCUR.
INDICATED. UTILISER UN	~AC INPUT
FUSIBLE DE RECHANGE DE	115V/60Hz, 490W	S/N
MEME TYPE.

USE CLASS 2 WIRING MINIMUM LOAD IMPEDANCE 4 Ω	LEFT
RIGHT

+RIGHT GROUND LEFT+

SAMSON

TO PREVENT SHOCK DO NOT

OPEN. NO USER SERVICABLE

PARTS INSIDE. REFER SERVICING

T O Q U A L I F I E D S E R V I C E

PERSONNEL. TO PREVENT FIRE

OR SHOCK HAZARD DO NOT

EXPOSE TO RAIN OR MOISTURE.

R L

(UNBALANCED 10KΩ /0dBM)

RIGHTLEFT

INPUTS

(BALANCED 10KΩ /0dBM)

The Servo 260 power amplifier is designed for fixed installations, recording and live performance use. Easily installed, this compact, 2-space rack-mount stereo power amplifier delivers 130 watts per channel into a 4 ohm load, over a bandwidth of 20 Hz to 50 kHz. The 260 features high-current output power transistors with a bipolar design and servo circuitry that continuously keeps DC output during idling at or near 0 volts. It also features balanced 1/4" Tip-Ring-Sleeve inputs as well as push-spring terminal outputs, front-panel clip, idle and protection lights and thermal and overcurrent protec- tion circuitry. The Servo 260 is convection cooled for silent operation, eliminating both fan noise and the need for filter maintenance. Housed in a rugged steel chassis, the Servo 260 uses high-quality component to ensure safe, reliable performance in all applications.

Contact:

•Rack-mount stereo power amplifier (2-space).

•130 watts per channel into 4 ohms (stereo).

•20 Hz to 50 kHz frequency response.

•Balanced 1/4″ TRS and unbalanced RCA inputs and push- spring terminal outputs.

•1/4″ and push-spring terminal outputs.

•Turn-on muting to prevent speaker “thumps.”

•Servo protection circuitry continuously keeps DC output during idling at or near 0 V (thus keeping idle speakers at their 0 point).

•Protection circuitry against overheating and overcurrent.

•High-current output power transistors.

•Unique bipolar circuit design.

•Front-panel clip, idle and protection lights.

•Independent left- and right-channel input controls with 41-position detents.

•Convection cooled (No Fan).

•All-steel chassis with new black matte titanium finish and anodized aluminum heat sink.

Samson Technologies Corp., P.O. Box 9031, Syosset, NY 11791-9031 • Phone: (516) 364-2244 • Fax: (516) 364-3888 • www.samsontech.com