Nikon COOLPIXP510RED L, m Modes, Rotate the mode dial to j, k or l, Frame the subject and shoot

j, k, l, m Modes

j (Programmed auto), k (Shutter-priority auto) or

l(Aperture-priority auto)

1 Rotate the mode dial to j, k or l.

		25m 0s
1/250	F5.6	840

Reference Section

2 Rotate the command dial or multi selector to set the exposure.

•In j mode, the flexible program (A59) can be set using the command dial.

•In k mode, the shutter speed can be set in a range from a maximum speed of 1/4000 to 4 seconds using the command dial.

•In l mode, the aperture value can be set in a range of f/3 to 8.3 (wide-angle position) and f/5.9 to 8.3 (telephoto zoom position) using the multi selector.

3 Frame the subject and shoot.

• In the default setting, the camera has nine focus areas, and automatically selects the focus areas containing the subject closest to the camera. When the subject is in focus, the focus areas that are in focus (up to nine areas) light in green (E47).

BNotes on Shooting

•When zooming is performed after the exposure is set, exposure combinations or aperture value may be changed.

•When the subject is too dark or too bright, it may not be possible to obtain the appropriate exposure. In such cases, the shutter speed indicator or aperture value indicator flashes when the shutter-release button is pressed halfway. Change the shutter speed setting or aperture value. When settings such as ISO sensitivity (E45) are changed, the appropriate exposure may be obtained.

CShutter Speed

The control range of the shutter speed differs depending on the aperture value or the ISO sensitivity setting (A83).

E10