Nikon F3AF instruction manual Close-Up Equipment

Page 60

-ACCESSORIES-continued------------

Close-Up Equipment

For shooting subjects which are located closer than the closest possible focusing distance of the lens, Nikon makes a wide variety of equipment:

1)Close-Up Attachment Lenses Nos. 0, 1,2, 3T. 4T, 5T. and 6T. These lenses screw into the front of the lens just like filters to magnify the image . Exposure metering can still be done at full aperture without compensation.

2)Auto Extension Rings PK-11, PK-12, PK-13.

These fit between the lens and camera body. Used singly or in combination, exposure determination is done at full aper- ture with all AI-type lenses. (The PK-11 cannot be attached to the AF-Nikkor lenses.)

3)Bellows Focusing Attachment PB-6.

The PB-6 is also attached between the lens and camera body. Exposure is determined by the stop-down method. The beauty of this accessory is that you can change magnifi- cations continuously by extending the bellows.

4)Micro-Nikkor 55mm fI2 .B, 105mm f/4, and 200mm f/41F. These specially designed lenses offer continuous focusing from infinity down to 1/2X lifesize. To obtain 1/2X to 1X mag- nification with an AI Micro -Nikkor lens, the use of an auto extension ring is required: the PK-13 for the 55mm f/2 .B, and the PN -11 for the 105mm f/4; to obtain magnifications from infinity up to 1X with the 200mm f/4 IF, use the Nikon Tele- converter TC-300. Even with these accessories, exposure is determined at full aperture. Note that in close-up photography, depth of field is generally shallow. Thus, you should stop down as much as possible when photographing a subject with great depth . Since Micro-Nikkor lenses are not compatible with the F3AF'sautofocus and focus-aid functions, focusing must be done by manually rotating the focusing ring @ while using the matte portion of the DX-1'sfocusing screen. For critical

focusing in close-up photography, the use of a suitable inter- changeable focusing screen and accessory viewfinder is recommended .

When using close-up equipment such as a bellows unit or exten- sion ring(s) attilched between the F3AF camera body and lens, focus-aid operation depends on lens extension from the camera'smounting flange, as shown in the following table.

For lenses not appearing in this list, focus-aid operation is im- possible with any close-up equipment attached . In addition, focus-aid operation cannot be performed when a lens is mounted in the reverse position.

Notes:

1)The F3AF 's meter coupling lever ® should be pushed up before at- taching a bellows unit or non-AI extension rings, such as the PK-I , 2, 3, PN-I , etc.

2)Before attaching the PB-6 to the F3AF, the OX· 1 Finder should be first removed from the camera body.

3)Auto Extension Rings pK-1 and PK-II , Extension Ring KI and Auto Adapter Ring BR-4 cannot be attached to AF-Nikkor lenses.

60

Page 59 Page 61
Image 60
Page 59 Page 61
Contents Nikon Page Nomenclature Page Index Contents Foreword Basic Operation ClipRemove the battery Chamber lid from the finder Load the batteries Into Findersbattery chamberReattach the lid Move the power switch Check battery powerDepress the shutter Release button @ halfway Mount the lens onto the camera Open the camera BackInstall the film Cartridge Insert the film leader in the takeup SpoolClose the camera Back Take up the film slackSet the Asaiiso film Speed Slide the A·M switchrs5 On the AF·Nikkor lenstoA Set the shutter speed Dial 72 at aSet the ·numberon Lens Hold the camera steady Compose the picturePage Take the picture Advance the filmPress the rewind button Rewind the film Remove the film CartridgeTurn the camera off FOCUS------------------------------~ Page Focus AutofocusFocus lock Focus-Aid Operation Using the Focus Indicators Manual Focus Using the Matte Portion of the Focusing Screen Special Situations Dark subject llIustSubject with no vertical lines lliust Page Exposure Setting the Film Speed Setting the Aperture Setting the Shutter SpeedPage Exposure + , ~S Manual Exposure ControlRelationship Between Shutter Speed and Aperture Page Depth of Field Depth-of-field preview button Lens set at f/2.8 Suggested Applications for Exposure Compensation Exposure compensation dialMemory lock button Stop-Down Exposure Measurement For non·Allenses with automatic diaphragmsBackup Mechanical Release Lever Shutter Release ButtonFilm Advance Lever @ Frame Counter Q§Self-Timer Eyepiece Shutter Lever @Mirror Lockup Lever CD Viewfinder IlluminatorMultiple Exposure Lever Memo HolderFilm Plane Indicator @ Infrared Focusing IndexFlashphotography Accessory Shoe Flash Photography Nlkon F3AFISpeedlight Combination Chart Ready-LightAccessories Interchangeable ViewfindersCaUl/on Accessories Focusing Screen Selector Guide Electronic Flash Equipment 5peedlights 5B·12, 5B·16A and 5B·17Speedlights S8·11 III Motor Drive MD·4Data Back MF·14 Close-Up Equipment Page Duplication work and photomicrography Slide with continuousAnti·Cold Battery Pack DB·2 Cable Release AR·3RubberEyecup Eyepiece Correction LensesFilters Lens HoodsCamera Cases NeckstrapsCompartment Cases How to Read the EV Chart WhatlsEV?Full-aperture metering Stop-down metering Chart EV Range of Camera30 ~ Tips on Camera Care That the stream of air is not con- centrated in one spot Tips on Battery USE About the Liquid Crystal Display LCD Specifications Page Specifications Page Nikon

F3AF specifications

The Nikon F3AF, introduced in 1983, is a landmark camera in the history of photography, notable for its pioneering autofocus capabilities. As one of Nikon's first professional autofocus cameras, the F3AF combines the robust features of the F3 series with advanced technology to offer photographers a powerful tool for capturing high-quality images.

One of the standout features of the F3AF is its autofocus system, which employs a sophisticated phase detection mechanism. This represents a significant leap forward from the manual focus cameras that dominated previous generations. The system can quickly and accurately lock onto subjects, making it easier for photographers to capture sharp images, particularly in dynamic or fast-paced situations.

The F3AF retains the iconic design and build quality of the F3, characterized by its rugged, weather-sealed construction that ensures durability in various shooting environments. The camera body features a comfortable grip and a solid metal chassis, appealing to professionals who require reliability and performance in the field.

Another key characteristic is its compatibility with a wide range of Nikkor lenses, including the autofocus Nikons. This flexibility allows photographers to choose the appropriate lens for their specific needs, whether they are shooting landscapes, portraits, or sports. The camera features a unique "Auto Focus" mode which works in tandem with specialized AF lenses to streamline the focusing process.

In terms of exposure modes, the F3AF offers automatic exposure through its TTL (Through The Lens) metering system. This capability allows for accurate exposure readings, helping photographers achieve optimal results in various lighting conditions. Additionally, the camera features multiple shooting modes, including manual, aperture priority, and shutter priority, accommodating the preferences of both novice and seasoned photographers.

Furthermore, the F3AF supports an array of accessories, including motor drives and special viewfinders, allowing photographers to enhance their shooting experience. The camera's electronic viewfinder provides a bright and clear display, giving users a precise view of their composition.

Despite being released decades ago, the Nikon F3AF remains a respected choice among film enthusiasts and collectors, representing a significant achievement in photographic technology. Its blend of innovative autofocus functionality, robust design, and versatile features make it an enduring symbol of Nikon's commitment to excellence in the world of photography.
Top Page Image Contents