Nikon Digital Camera First Steps, Attach the strap, Charge the battery, Insert the battery

First Steps

Always turn the camera off before inserting or removing batteries or memory cards.

1Attach the strap.

Attach the strap securely to the two eyelets on the camera body as shown below.

2Charge the battery.

If a plug adapter is supplied, raise the wall plug and connect the plug adapter as shown below at left, making sure the plug is fully inserted. Insert the battery and plug the charger in. An exhausted battery will fully charge in about an hour and thirty minutes.

Battery Charging charging complete

3Insert the battery.

Insert the battery in the orientation shown (e), using the battery to keep the orange battery latch pressed to one side. The latch locks the battery in place when the battery is fully inserted (r).

X

6