Troubleshooting
If your camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon representative. Refer to the page numbers listed in the rightmost column for informa- tion on solving the problems listed here.
Electronically-Controlled Cameras
In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the batteries, and turn the camera on again, or, if you are using the
Problem | Possible cause |
| |
|
|
| |
| • Camera is off. | 27 | |
| • Battery is not correctly inserted or | 20 | |
Monitor is blank | memory card slot cover is not securely closed. |
| |
• Battery is exhausted. | 26 | ||
| • | 21 | |
| • Camera is connected to the | – | |
| • Audio/video cable is connected. | 59 | |
Camera turns off | • Battery is low. | 26 | |
immediately | • Battery is cold. | 100 | |
No indicators | • Indicators are automatically hidden after five seconds. | 15 | |
Press the multi selector to display indicators again. |
| ||
appear in monitor |
| ||
• Slide show is in progress. | 84 | ||
| |||
|
|
| |
Monitor is hard to | • Monitor brightness requires adjustment. | 95 | |
read | • Monitor is dirty. Clean monitor. | 99 | |
|
|
| |
| • Camera shook during shot. Blurring caused by cam- |
| |
| era shake can be reduced by: |
| |
Photos are blurred | 40 | ||
| 80 | ||
| 43 |
Technical Notes
10