Nikon SB-24 instruction manual 501/N2020 and F-301/N2000, FA, FE2 and FG ISO 25 to

I TTL AUTO iIll FLASH WITH OTHER CAMERAS --------

(with Nikon F-501/N2020, F-301/N2000, FA, FE2 or FG)

With a Nikon F-501/N2020, F-301/N2000, FA, FE2 or FG camera, the S8-24 set at TTL provides standard TTL flash light output control. With the F-501/N2020, F-301/N2000 in pro- grammed or shutter-priority auto exposure mode, Programmed TTL au10 flash will be selected. In other cases, the S8-24 performs TTL auto flash .

PROGRAMMED TTL AUTO FLASH (with Nikon

F-501/N2020 or F-301/N2000 in Programmed or Shutter Priority Auto Exposure Mode)

Programmed TTL auto flash simplifies cameralflash operations, allowing you to concentrate on picture composition without worrying about exposure settings, including aperture.

For correct exposure in TTL auto flash mode, use film within the range specified below:

For programmed TTL auto flash operation, use AI -S type< lenses only.

F-501/N2020 and F-301/N2000	ISO 25 to 1000
FA, FE2 and FG	ISO 25 to 400

*AI-S type lenses include AF Nikkor, Nikkor lens with a built-in CPU and Series E lenses. Each lens shows the minimum aperture in orange at the aperture indexing post on the aperture ring. Lenses modified for AI operation cannot be used for this mode.

*For autofocus operation with the F-501lN2020, set the camera's focus mode to Single Servo Autofocus. (For details about autofocus flash photography, see pages 64 to 65).

*Set the camera's film advance mode to single-frame shooting.

57