Nikon SB-27 instruction manual Setting and canceling Forced TTL mode/Forced a mode

Setting Forced TTL and Forced A modes

(Applicable to all camera groups)

•Select Forced TTL mode when using the SB-27 as a slave unit(s) in multiple flash operation. (See page 63.)

Please refer to “NOTE: Using the SB-27 as a slave flash unit” on page 64.

•Select Forced A (non-TTL Auto Flash) mode when you intentionally want easy exposure compensation with cameras in Groups I thru VI.

Setting and canceling Forced TTL mode/Forced A mode

■Forced TTL mode

1

2

Set the camera setting switch (inside the SB-27's battery chamber) to ˚.

Switch the flash mode selector from OFF to AUTO while holding down the "ZOOM" button.

TTL	f t	m
	60	18
M mm	30	9
A ZOOM	15	4
M ISO	7	2
	4	1
	2	0.6

—The t indictor in the LCD panel blinks to indicate that the SB-27 is in Forced TTL mode.

69