Yamaha HTR-6090 owner manual Customizing this Unit Manual Setup, 83 En, Auto setup Auto Setup

Page 87

CUSTOMIZING THIS UNIT (MANUAL SETUP)

You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.

■Auto setup AUTO SETUP

Use this feature to automatically adjust speaker and system parameters (see page 31).

■Manual setup MANUAL SETUP

Use this feature to manually adjust speaker and system parameters.

Basic menu 1 BASIC MENU

Use this menu to manually adjust basic system parameters.

Parameter

Features

Page

 

 

 

A)SPEAKER SET

Selects the size of each speaker, the speakers for low-frequency signal output, and the

86

crossover frequency.

 

 

 

 

 

B)SP LEVEL

Adjusts the output level of each speaker.

89

 

 

 

C)SP DISTANCE

Adjusts the delay time of each speaker.

89

 

 

 

D)TEST TONE

Turns the test tone output on or off for the SPEAKER SET, SPEAKER LEVEL and SP

90

DISTANCE setting.

 

 

 

 

 

Sound menu 2 SOUND MENU

Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system or compensate for video signal processing delays when using LCD monitors or projectors.

Parameter

Features

Page

 

 

 

A)EQUALIZER

Adjusts the tonal quality of the center speaker.

90

 

 

 

B)LFE LEVEL

Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.

91

 

 

 

C)DYNAMIC RANGE

Adjusts the dynamic range of Dolby Digital or DTS signals.

91

 

 

 

D)AUDIO SET

Adjusts the muting level, audio delay and tone bypass settings.

92

 

 

 

E)HDMI SET

Selects the component to play back HDMI audio signals.

92

 

 

 

OPERATION

ADVANCED

 

 

83 En

Page 86 Page 88
Image 87
Page 86 Page 88
Contents HTR-6090 Important Safety Instructions Example of Antenna Grounding FCC Information for US customersSerial No IiiFor Canadian Customers Pour LES Consommateurs CanadiensContents Features About this manual Supplied accessoriesGetting Started Check that you received all of the following partsFront panel Controls and FunctionsPure Direct Zone 2 VolumeEnhancer NightReturn Remote controlRemote control controls and functions LevelMacro PowerVolume + Macro ON/OFFRemote control sensor Approximately 6 m 20 ft Preparing the remote controlInput source indicators Hdmi indicatorDock indicator Battery charge indicator10 En AC IN/OUTLETS Rear panel11 En Wrench HolderConnections Placing speakers12 En Left Right Center speaker Connecting speakers13 En Subwoofer Surround back speakers14 En Connecting the speaker cableBanana plug Connecting the banana plugTighten the knob using the supplied speaker terminal wrench 15 En16 En Conventional connectionBi-amplification connection Video jacks Information on jacks and cable plugs17 En Audio jacksHdmi jack and cable plug Information on Hdmi18 En Hdmi compatibility with this unit19 En Audio and video signal flowAudio signal flow Video signal flow20 En Connecting a TV monitor or projectorDVD player Connecting other componentsConnecting a DVD player 21 EnDVD recorder, PVR or VCR Connecting a DVD recorder, PVR or VCRConnecting set-top boxes 22 EnTurntable CD player Connecting audio components23 En CD recorder24 En Connecting an external amplifierMulti-format player/External Decoder Connecting a multi-format player or an external decoder25 En For 6-channel input For 8-channel inputUsing the Video AUX jacks on the front panel 26 EnGame console or Video camera Connecting the FM and AM antennas Connecting the AM loop antenna27 En Memory back-up Connecting the power cableConnecting the AC power cable 28 EnSee page 30 for details about turning on or off this unit Setting the speaker impedance29 En Make sure this unit is turned offFront panel Turning on and off the powerWhen all connections are complete, turn on this unit 30 EnAuto Setup Using Auto Setup31 En 32 En AutomenuAutocheck Resultexit33 En Output level Resultwiring34 En Results of the parametric equalizer of each speaker35 En ErrorIf an error screen appears SET MenuIf Warning appears 36 EnTurn on the video monitor connected to this unit Basic procedurePlayback 37 En38 En Guide to contentsSelecting audio input jacks 39 EnAuto 40 En Using your headphonesSelecting the Multi CH Input component Muting the audio outputAudio information Displaying the input sourceInformation 41 En42 En Using the sleep timerCanceling the sleep timer Playing video sources43 En Front panel operations Remote control operationsSound Field Programs Selecting sound field programsClassical Sound field program descriptions44 En For music audio sourcesEntertainment 45 EnFor various sources ChamberMovie 46 EnFor visual sources of music For movie sourcesStereo 47 EnStereo playback Spectacle48 En Deactivating the Straight modeEnjoying unprocessed input sources StraightBypassing the tone control circuitry Using Audio FeaturesEnjoying pure hi-fi sound Adjusting the tonal quality 49 EnPress Parameter and then l / h to set the Direct parameter Adjusting the speaker levelEnjoying multi-channel sources in 2-channel stereo 50 EnSelecting the Compressed Music Enhancer mode 51 EnFollowing display is shown in the OSD 52 En Selecting the night listening mode53 En FM/AM TuningRemote control functions FM/AM controls and functionsAutomatic tuning 4 154 En No colon Manual tuning55 En Hold down the button to continue searchingSeconds Automatic preset tuning56 En Press and hold Memory for more thanManual preset tuning 2,557 En 58 En Selecting preset stationsPress and hold Edit for more than 3 seconds Exchanging preset stationsSee Selecting preset stations on 59 EnXM Passport and XM Passport Home Dock sold separately XM Satellite Radio Tuning60 En Information from XM Satellite Radio Inc61 En XM Satellite Radio controls and functionsENT Srch ModeActivating XM Satellite Radio 62 EnCheck the connection 63 EnInput selector Remote control Lights upBasic XM Satellite Radio operations 64 EnAll Channel Search mode 65 EnA. model Category Search mode Front panel Remote control66 En 67 En Preset Search modeDirect Number Access mode 68 EnChannel number Currently selected channel number Setting the XM Satellite Radio preset channelsCurrently selected preset channel group 69 EnPreset channel number appears in the front panel display Displaying the XM Satellite Radio information70 En Displaying the XM Satellite Radio information in the OSD 71 En72 En Controlling iPod in the simple remote ModeControlling iPod in the menu browse Mode Controlling iPodRepeat Repeat 73 EnFollowing display appears in the OSD Shuffle Shuffle74 En RecordingPress h to increase the value Press l to decrease the value Advanced Sound ConfigurationsChanging sound field parameter settings 75 EnINIT.DLY 76 EnSound field parameter descriptions DSP Level77 En Room Size P.ROOM Size S.ROOM Size SB Room SizeLiveness S.LIVENESS SB Liveness REV.LEVEL REV.DELAY78 En REV.TIMESelecting decoders for 2-channel Sources surround decode modePress Select on the remote control 79 EnSurround Decode 80 EnDecoder descriptions Surround Decode PRO LogicAvailable decoders 81 EnSelecting decoders used with sound Field programs Decoder parameter descriptionsDecoders 82 EnSelecting decoders for multi-channel Sources Auto Auto83 En Customizing this Unit Manual SetupAuto setup Auto Setup Manual setup Manual Setup84 En Signal information Signal Info85 En Using SET MenuPress k / n to select Manual Setup Press Enter to enter Manual SetupLFE/BASS OUT Speaker settings Aspeaker SETBlfe Level Basic MenuChoices NONE, SML, LRG Center SP87 En Center speaker Center SPPriority 02ASUBWOOFER PhasePresence SP Cross OverSpeaker distance CSP Distance BSP Level89 En Speaker level BSP LevelEqualizer select Select Dtest ToneAequalizer 90 EnCdynamic Range 91 EnLow-frequency effect level 92 En Audio settings Daudio SETDaudio SET Ehdmi SET93 En CMPNT-V InputCoaxial Optical94 En Optical OUTHdmi Cinput RenameEmulti CH SET Cvolume TrimDdecoder Mode Multi channel input SetupDisplay settings Adisplay SET Adisplay SET96 En 97 En 98 En Bmemory GuardCaudio Select EPARAM. INIXM Radio setting GXM Radio SET Hdock SET99 En Controlling this unit Remote Control FeaturesControlling this unit, a TV, or other components 100 EnControlling other components 101 En102 En Setting remote control codesControlling optional components Option mode Remote control code default settingsPress Enter to set the number Press Learn again to exit from the setup mode103 En Press Enter104 En Remote controlsChanging source names in the display window Press Learn again to exit the learning modePress Rename using a ballpoint pen or similar object Other remote controlMacro programming features 106 EnMacro operations Default macro functions 107 EnFirst Second Third Programming macro operations 108 EnClearing function sets Clearing configurationsPress k / n to select the clear mode 109 EnPress Learn again to exit 110 EnClearing a learned function Selected component name appears in the display windowPress Macro again to exit the macro programming mode 111 EnClearing a macro function 112 En Using MULTI-ZONE ConfigurationConnecting the Zone 2 components Using external amplifiers113 En Using the internal amplifiers of this unitImportant Safety Notice Controlling Zone114 En Turning on or off Zone 2 using Remote controlSelected input source is shared across all zones 115 EnAdjusting the balance of the speaker level in Zone Adjusting the tonal quality of Zone116 En Rotate the Program selector on the front Advanced SetupAdjust 117 En118 En 119 En Setting remote control IDVideo reset Video Reset Setting remote control AMP ID120 En Setting remote control tuner ID or XM IDRemote control AMP codes OK appears in the display window if setting was successfulRemote control tuner codes Remote control XM codes121 En Troubleshooting 122 EnGeneral 123 En 124 En Tuner 125 EnXM Satellite Radio 126 EnDoes not learn new 127 EnDoes not work or Function properlyIPod Hdcp ErrorBefore Auto Setup 128 EnDuring Auto Setup After Auto Setup129 En While holding Resetting the SystemPanel to select Preset 130 En131 En Glossary132 En Video signal 133 EnSampling frequency and number Quantized bits Virtual Cinema DSP Sound Field Program Information134 En Elements of a sound fieldFactor Parametric Equalizer Information135 En FrequencySpecifications 136 EnWe Want You Listening For a Lifetime APPENDIX-i Channel audio 6.1-channel Monaural StereoAudio *2 Audio *3 Movie APPENDIX-iiSurround Decode APPENDIX-iiiNeo6 Cinema Neo6 Music APPENDIX-ivAPPENDIX-v APPENDIX-vi Tape DeckSatellite Tuner APPENDIX-vii VCR APPENDIX-viiiAPPENDIX-ix Page Page WH62510
Related manuals
Manual 3 pages 53.38 Kb

HTR-6090 specifications

The Yamaha HTR-6090 is a high-performance home theater receiver that was designed to deliver an immersive audio experience for movie enthusiasts and music lovers alike. Released as part of Yamaha’s extensive lineup of AV receivers, the HTR-6090 boasts a host of features and technologies that cater to the demands of modern home entertainment systems.

One of the standout features of the HTR-6090 is its 7.1-channel surround sound capability, allowing users to connect multiple speakers for a fully immersive audio experience. This receiver supports various audio formats, including Dolby Digital, DTS, and PCM, ensuring compatibility with a wide range of media sources. The powerful amplification system can deliver 90 watts per channel, making it suitable for driving various speaker configurations.

The receiver incorporates Yamaha’s proprietary YPAO (Yamaha Parametric Acoustic Optimizer) technology, which automatically calibrates the audio settings based on the room’s acoustics. This feature enhances sound quality by measuring the distance and size of each speaker, ultimately creating a customized listening environment tailored to the user's specific space.

Connectivity is a crucial aspect of any modern AV receiver, and the HTR-6090 does not disappoint. It offers multiple HDMI inputs and outputs, supporting 1080p video resolution for high-definition content. Additionally, the receiver features audio inputs for components like CD players, turntables, and streaming devices, making it versatile for various setups.

In terms of user-friendliness, the HTR-6090 is equipped with an intuitive remote control and an on-screen display, simplifying the user experience. The receiver also supports various audio enhancement technologies, such as Music Enhancer, which restores lost high frequencies in compressed audio formats, allowing for a richer sound during playback.

Another highlight of the HTR-6090 is its capability for multi-zone audio control. This allows users to enjoy music in different areas of their home, creating an engaging atmosphere for gatherings or simply enhancing personal enjoyment in various spaces.

Overall, the Yamaha HTR-6090 stands out as a reliable and feature-rich option for those looking to enhance their home theater setup. With its impressive sound quality, extensive connectivity options, and advanced technologies, it continues to be a popular choice among audiophiles and home theater enthusiasts.
Top Page Image Contents