Appendix E - Trouble Shooting
Trouble Shooting
1No Power
1.1Check power input connection
1.2Check fuse on the PCB
1.3Check connection between camera body and base
2 No Video
2.1Check camera video output on camera
2.2Check cable (damaged cable)
2.3Check video input connection on monitor
2.4Check 20PIN connection between camera body and base
3 No Telemetry
3.1Check camera ID switch setting
3.2Check
3.3Check
3.4Check if the fast dome is under Auto Pan mode Please deactivate the Auto Pan
3.5Check if alarm is triggered, Cancel triggered alarm
4 Poor Focusing
4.1Dusts on dome cover or housing cover. Clean the cover with cotton cloth
Installation Kit
Item | Unit | Type | |
Power Supply | 1 | Embedded / Attached | |
Power Cable | 1 | Embedded / Attached | |
M4 x 25 Tapping | 3 | Embedded | |
M4 x 30 Machine | 3 | Embedded | |
M4 x 6 Machine | 6 | Embedded | |
Screw Nut | 3 | Embedded | |
Ceiling Ring | 1 | Embedded | |
L Shape Screw Nut | 3 | Embedded | |
Fix Ring | 1 | Embedded | |
Decoration Ring | 1 | Embedded | |
M4 x 25 Tapping | 3 | Attached | |
Plastic Screw Nut | 3 | Attached | |
Decoration Ring | 1 | Attached |
NetComm NS4540 Dome Camera User Guide | YML7** Rev1 |
54 | www.netcomm.com.au |