Nortel Networks NS4540 manual Configuring your Camera, Preparation before IP Assignment

Page 25

4. Configuring your Camera

4-1 Preparation before IP Assignment:

Always consult your network administrator before assigning an IP address from your server. Make sure the NETCOMM NS4540 is powered on and correctly connected to the network. Obtain an IP address not used yet from your network administrator.

MAC Address: Each NETCOMM NS4540 has a unique Ethernet address (MAC address) shown on the bottom of the NETCOMM NS4540 as the serial number (S/N) with 12 digits (e.g. 000429-XXXXXX).

4-2 Assign IP Address by ARP Command

Note before IP assignment:

Make sure the NETCOMM NS4540 is powered on and connected to the network correctly.

Obtain a unique IP address from your network administrator.

Each NETCOMM NS4540 has a unique Ethernet address (MAC address), which is recorded as a 12 digit serial number labeled at the base of NETCOMM NS4540 (e.g. 000429xxxxxx).

Following examples use a PC with an IP address 192.168.0.1, the NETCOMM NS4540 will be given an IP address 192.168.0.200 whose MAC address is 000429000150. Always consult your network administrator before assigning an IP address.

The IP address assigned to the NETCOMM NS4540 shall be the same IP domain (pre- sented as same subnet mask) as the PC IP address. In our case, a PC IP address is 192.168.0.1 and the NETCOMM NS4540 is 192.168.0.200, so the subnet mask shall be 255.255.255.0. If a PC subnet mask is 255.255.255.128 or higher, then the domain can't cover 192.168.0.200, so the settings will not take effective.

For speedy install and easy setting of the IP Address, NETCOMM Limited provides an IP Installer Wizard for you. Please install the application and see the user's manual for detailed description and usage.

1. In Windows, open DOS window.

Enter DOS by <Start?Program?MS-DOS Prompt>

2.Ensure the IP address assigned to NETCOMM NS4540 is not occupied by other Hosts. In DOS window, entering <ping 192.168.0.200> shall get "time out" message

C:\>ping 192.168.0.200

Pinging 192.168.0.200 with 32 bytes of data: Request timed out.

Request timed out.

Request timed out. Request timed out.

Ping statistics for 192.168.0.200: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

Approximate round trip times in milliseconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\>

YML7** Rev1

NetComm NS4540 Dome Camera User Guide

www.netcomm.com.au

25

Image 25
Contents NS4540 Contents Appendix C Update custom web pages NetComm NS4540 Dome Camera User Guide YML7** Rev1 Introduction What is the Netcomm Network Dome Camera?Advantage Features Package Contents Structural Elements HardwareConnection Jack and Cable Requirement POWER/STATUS LED DIP Switch Setting Netcomm NS4540 ID Address Setting Refer Chart Indoor Installation Structural Drawing InstallationOutdoor Installation Structural Drawing Pendant Mounting Embedded Mounting False Ceiling NetComm NS4540 Dome Camera User Guide YML7** Rev1 Attached Mounting Fixed Ceiling YML7** Rev1 NetComm NS4540 Dome Camera User Guide YML7** Rev1 NetComm NS4540 Dome Camera User Guide Pendant Mounting External Housing NetComm NS4540 Dome Camera User Guide Assign IP Address by ARP Command Configuring your CameraPreparation before IP Assignment NetComm NS4540 Dome Camera User Guide YML7** Rev1 Execute IP Installer Assign IP by IP InstallerNetcomm IP Installer form is displayed on the screen Assign an IP Address to Netcomm NS4540 Verify the IP Address and Open the Home Verify and Complete the Installation from Your BrowserNetComm NS4540 Dome Camera User Guide YML7** Rev1 To Browse Netcomm NS4540 Live Video From Homepage Netcomm NS4540 Homepages Usage OverviewServer Configurations ConfigurationNetwork Configurations Video Configurations ConfigurationsEvent Configurations Server Configuration Netcomm NS4540 Configurations SettingServer General Settings User SettingsAdd New User System Command Clock SettingNetwork General Settings Network SettingDhcp Settings Smtp SettingsDdns Setting NetComm NS4540 Dome Camera User Guide YML7** Rev1 PTZ Settings I / O ConfigurationGpio Input Status Time Stamp Video SettingNtsc PAL Video AdjustmentMotion Area Selection Event ManagementDome Camera are supported Event EditChanges button in the main Administration panel Operational Appendix a SpecificationsCamera Electrical Optical LensEnvironmental MechanicalAppendix B Upgrading the Software Upgrade procedure via FTPCheck software version NetComm NS4540 Dome Camera User Guide YML7** Rev1 Clean up system Appendix C Update custom web pagesDownload complete web pages Upload custom web pagesSave the changes to flash Verify updated contentsAppendix D Emergency Factory Default Installation Kit Appendix E Trouble ShootingContact Information Appendix F Registering your NetComm ProductTrade marks and Notices Legal & Regulatory Information Copyright InformationCustomer Information Warranty NetComm NS4540 Dome Camera User Guide YML7** Rev1