1 With maxim um aperture faster than fl3.5, use TC-16A Autofocus Converter. Incompatible with maximum aperture of fl3.5 or slower.
2 With maximum aperture faster than f/5.6.
3 With maximum effective aperture faster than fl5.6.
4 With shutter speed set to 1/125 sec. or slower. Flash necessary.
5 Aperture cannot be selected.
6 Exposure determined by presetting lens aperture. Exposure must also be determined before shifting; in A mode, use AE-L button before shifting.
7 Shutter should be released, after exposure measurement, by stopping down PS-6.
8 Use stop-down measurement with Type S, E, K, J, or P focusing screen.
9Use full-aperture measurement with maximum aperture of fll8 to fl2.8.
10Focus lock button on TC-16 cannot be used.
11Stop-down measurement possible. With aperture of f/5.6 or slower, set exposure compensation dial (or focusing screen exposure compensation dial for flash photography) to-l With 400mm fl5.6 lens, compensate exposure to -1 when the lens aperture is set at fl8 or slower.
12 For full-aperture measurement, set exposure compensation
dial (or focusing screen exposure compensation dial for flash photography) to - l
13 For full-aperture measurement, set exposure compensation dial to +l
14 1n stop-down measurement, set exposure compensation dial (or focusing screen exposure compensation dial for flash photography) to - l
15 In stop-down measurement, set exposure compensation dial to +l
16 Exposure compensation necessary. (See focusing screen's instruction sheet.)
17 Exposure compensation necessary for full -aperture measurement. (See footnote 12 or 13.)
18 Exposure compensation necessary for stop-down measure- ment. (See footnote 14 or 15.)
•The following Nikkor lenses cannot be used with the F4s1F4 camera: All 8mm fl8, 16mm fl3.5 (No. 272281 - 290000), 28mm fl3.5 (No. 625611 - 999999), 35mm fl1.4 (No. 385001 - 400000), all 55mm fl1.2, all old-type Reflex 1000mm fl6.3, all 21mm fl4, all old-type PC 35mm fl3.5.
•The AF Teleconverter TC-16 (for F3AF) cannot be attached to the F4s camera.
•To attach an old-type Reflex-Nikkor 500mm fl8 to an F4s camera, turn the lens'tripod mounting collar so it faces the direction opposite the camera'sgrip (from the front of the camera, it should face the right-hand side). To change the camera/lens assembly from horizontal to vertical position or vise versa, do not turn the assembly; turn the tripod head.
