Meca b litz 28 Cs 2 digital | Metz Camera Flash Light instruction

meca b litz 28 Cs - 2 digital

For the imaginative

Flash with a fun factor:

Have you ever been upset due to photographs that are too dark, because the integrated flash in your camera was once again inadequate? Wouldn’t you like to have a handy flash unit that can also be used sepa- rate from the camera once in a while? Then Metz has the perfect solution for you! Let the curtain rise for the Metz mecablitz 28 CS-2 digital, with technology and a size that have been optimally matched to compact digital cameras. The fun factor comes from the self-learning

slave mode and the clever EASY mode. For the first time, flash results can be affected directly by means of the immediate correct buttons (+/-). This means you only have to take the shot – check the results on the cam- era’s monitor – and readjust using the buttons if necessary. With this slave model, you increase the flash power absolutely without any undesired side effects. This is because it draws its energy either from alkaline micro batteries, which are available every- where, or from equally economical rechargeable Micro batteries.

Flash output

•max. GN of 28 for ISO 100/21° and 85 mm

Basic configuration

•Slave mode: flash unit triggered by the integrated camera flash or by another external flash unit

•LCD display

•flash readiness and exposure control indicator on the unit

•flash range indicator in the LCD

•illumination from 24 mm (wide-angle diffuser) up to 85 mm (telephoto attachment)

•automatic unit switch-off

Standard flash modes

•automatic flash mode with

8 automatic apertures

•manual flash mode with 4 partial lighting levels

•Easy Mode: manual exposure correction with +/- buttons

IN DETAIL

Easy control with	Clearly laid out	Perfect for mounting on
the +/- buttons	display	the integrated, extendible
		telescopic bracket