Metz 34 AF-3 C Flash in the individual camera modes, Use of flash in the program modes

Page 13

7. Flash in the individual camera modes

7.1 Use of flash in the program modes

TTL-controlled flash shots can be made in all expo- sure and auto program modes. Once the mecablitz is attached to the camera and switched on, it auto- matically operates with TTL flash control in auto program (P), aperture priority (Av), shutter priority (Tv) and in the manual modes.

7.2 Special functions not supported by flash

Depth of field (DEP):

The depth of field auto mode is not operative when the flashgun is switched on. Exposure is then completed as in the auto program mode.

Soft focusing (SF):

The flash is only fired for the first exposure in the soft focusing mode. This means that a soft focu- sing effect may not be achieved!

Program shift:

Program shift (shutter speed/aperture combina- tion) in auto program mode cannot be performed when the flashgun is switched on.

Please refer to the camera’s operating instructions for further details.

13

Image 13
Contents Mecablitz 34 AF-3 C Dear Customer ForewordContents Do not short-circuit batteries! Danger of Explosion Safety instructionsDo not dispose of spent batteries with domestic rubbish Preparing the mecablitz for use Power supplyLoading and exchanging batteries Mounting/Removing the flashgun Automatic flashgun switch-offFeatures this function Setting the mecablitz into operationSwitching the flashgun on and off Flash-ready indication Flashgun instructions to the cameraAutomatic flash sync speed control Correct-exposure indication see figBlinks Information displayed in the camera’s viewerCameras Ra modelTTL flash control Flash exposure storage Red „E-TTL indicator lights up on the mecablitzNormal synchronisation Flash synchronisationSecond curtain synchronisation Rear Flash in the individual camera modes Soft focusing SFUse of flash in the program modes Depth of field DEPAF red-light beam Autofocus measuring flashAutomatic fill-in flash Only the central AF sensor is supportedGuiding edge Case gap Lighting and attachmentsSwitch off the flashgun with the main switch Care and maintenance TroubleshootingForming the flash capacitor Manual firing buttonColour temperature approx K Synchronization Technical dataFlash duration Number of flashes Flash recycling timeSticker can be applied to the back of the flashgun Lighting distances