Metz 34 AF-3 C Information displayed in the camera’s viewer, Blinks, Cameras, Ra model

Page 9

Fig. 4: Exposure o.k.

The following table only gives a general survey. Camera-speciﬁc deviations ar possible (please refer to the camera’s operating instructions.

	blinks:	Indicates that ﬂashgun should be
		used or switched on (on some
		cameras).

	illuminated:	The ﬂash is ready for use (on some
		cameras) Please refer to your
		camera’s operating instructions to
		ﬁnd out if this applies to your came-
		ra model.

Image 9

Contents Mecablitz 34 AF-3 C Dear Customer ForewordContents Safety instructions Do not short-circuit batteries! Danger of ExplosionDo not dispose of spent batteries with domestic rubbish Power supply Preparing the mecablitz for useLoading and exchanging batteries Mounting/Removing the ﬂashgun Automatic ﬂashgun switch-offSetting the mecablitz into operation Features this functionSwitching the ﬂashgun on and off Flash-ready indication Flashgun instructions to the cameraAutomatic ﬂash sync speed control Correct-exposure indication see ﬁgBlinks Information displayed in the camera’s viewerCameras Ra modelTTL ﬂash control Flash exposure storage Red „E-TTL indicator lights up on the mecablitzFlash synchronisation Normal synchronisationSecond curtain synchronisation Rear Flash in the individual camera modes Soft focusing SFUse of ﬂash in the program modes Depth of ﬁeld DEPAF red-light beam Autofocus measuring ﬂashAutomatic ﬁll-in ﬂash Only the central AF sensor is supportedGuiding edge Case gap Lighting and attachmentsSwitch off the ﬂashgun with the main switch Care and maintenance TroubleshootingForming the ﬂash capacitor Manual ﬁring buttonColour temperature approx K Synchronization Technical dataFlash duration Number of ﬂashes Flash recycling timeSticker can be applied to the back of the ﬂashgun Lighting distances