Nikon D300s, D300S (Body Only) Select preset d-0, 146, Direct Measurement Mode, Preset d-0

6Select preset d-0.

If the new value for preset white balance will be used immediately, select preset d-0 by pressing the WB button and rotating the sub-command dial until d-0 is displayed in the control panel.

r

DDirect Measurement Mode

If no operations are performed while the displays are flashing, direct

measurement mode will end in the time selected for Custom Setting c2 (Auto meter-off delay, 0 273).

APreset d-0

The new value for white balance will be stored in preset d-0, automatically replacing the previous value for this preset (no confirmation dialog will be displayed). A thumbnail will be displayed in the preset white balance list

(0 147).

To use the new value for white balance, select preset d-0 (if no value has

been measured for white balance before d-0 is selected, white balance will be set to a color temperature of 5,200 K, the same as Direct sunlight). The new white balance value will remain in preset d-0 until

white balance is measured again. By copying preset d-0 to one of the other presets before measuring a new value for white balance, up to five white balance values can be stored (0 147).

146