Using the Built-in Flash

Follow these steps when using the built-in flash.

1 Choose a metering method

Metering selector

(0 102).

 

Select matrix or center-weighted metering to activate i-TTL balanced fill- flash for digital SLR. Standard i-TTL flash for digital SLR is activated automatically when spot metering is selected.

2Press the flash pop-up button.

The built-in flash will pop up and begin charging. When the flash is fully charged, the flash-ready indicator (c) will light.

Flash pop-up button

3Choose a flash mode.

Press the Mbutton and rotate the main command dial until the desired flash mode icon is displayed in the control panel (0 175).

l

Mbutton

Main command

 

dial

Control panel

171

Page 197
Image 197
Nikon D300S (Body Only), D300s Using the Built-in Flash, 102, Press the flash pop-up button, Choose a flash mode, 171