DEFROST
MAIN MENU | 08:05:01 | NOTE: DEFROST starts automatically after 6 hours of | ||
chilling but only if operating in Holding mode. | ||||
BY TEMP | BY PROD | |||
BY TIME |
|
|
| |
| MORE | MAIN MENU | 08:06:01 | |
|
| HOLD PROD | ||
|
| DEFROST | SETUP | |
|
| BACK |
|
READY TO DEFROST
REMOVE FOOD
CANCEL START
DEFROSTING COIL 12°F
TIME REMAINING 19:52
EXIT
DEFROST
NOT REQUIRED
From the Main Menu, select MORE and DEFROST.
•To begin Defrosting, remove food and select START.
(CANCEL returns to the Main Menu.)
•The DEFROST cycle runs 20 minutes or until the Coil Temperature reaches 50°F.
(EXIT returns to the Main Menu.)
•If DEFROST NOT REQUIRED is displayed, return to Main Menu is automatic.
PRINT — Once a chill cycle is done, data can be printed.
MAIN MENU 08:05:01
BY TEMP BY PROD
BY TIME
MORE | MAIN MENU 08:06:01 |
HOLD PROD PRINT
DEFROST SETUP
BACK
PRINT CYCLE #____
PROBE #_ MM/DD HH:mm→
←BACK SELECT NEXT→
MAIN MENU | ||
PROBE | #_ | |
|
| RECORD |
|
| LABEL |
NONE |
| BOTH |
From the Main Menu, select MORE and PRINT.
•The last chill cycle displays Probe # (if BY TEMP), MM/DD (= month/day), and HH:mm (= hour:minute). Probe # will not display if the chill cycle was BY TIME.
•Select the Cycle you want to print by pressing ← (for previous) and → (for next).
•Press PRINT.
(MAIN returns to the Main Menu.)
•To print, select RECORD, LABEL or BOTH. After printing, the display returns to the Main Menu.
(NONE returns to the Main Menu.)
– 18 –