Hobart ML-124066, ML-124068, HQC90, HQCF45 Freeze, Set the TARGET Temp using the ↓ or ↑ keys, Mode

•Access the Sys Par 2 menu as shown on page 21.

SYS PAR 1	09:07:31
CLOCK TEMPS IN °F
PROBES	LOGGING
SETUP MENU	MORE	SYS PAR 2		09:08:41
		REMOTE ALARM MODE
		ALARMS		BUZZER
		BACK	FAC PRESETS

MODE

MODE PARAMETERS

CHILL FREEZE

SOFT CHILL

BACK

•From Sys Par 2, select MODE.

•From Mode Parameters, select FREEZE. (BACK returns to SYS PAR 2.)

FREEZE
FREEZE MODE EDITOR		• Set the TARGET Temp using the ↓ or ↑ keys.
↓TARGET	0° F ↑	Range: [–22°F to 28°F].
←BACK	NEXT→	• Select NEXT to move to the next field.
CANCEL	ENTER
FREEZE MODE EDITOR		• Set the AIR Temp using the ↓ or ↑ keys.
		Range: [–32°F to 20°F].
↓AIR	-25°F↑
←BACK	NEXT→	• Select NEXT to move to the next field.
CANCEL	ENTER
FREEZE MODE EDITOR		(BACK returns to the previous field.)
↓HOLD	-6°F↑	• Set the HOLD Temp using the ↓ or ↑ keys.
←BACK	NEXT→
		Range: [–32°F to 20°F].
CANCEL	ENTER
FREEZE MODE EDITOR		• Select NEXT to move to the next field.
↓HIGH ALARM	32°F↑	• Set the HIGH ALARM Temp using the ↓ or ↑ keys.
←BACK	NEXT→	Range: [1°F to 35°F].
CANCEL	ENTER
FREEZE MODE EDITOR		• Select NEXT to move to the next field.
↓LOW ALARM	-20°F↑	• Set the LOW ALARM Temp using the ↓ or ↑ keys.
←BACK	NEXT→	Range: [–30°F to 0°F].
CANCEL	ENTER	(NEXT returns to the TARGET TEMP field.)

•Select ENTER to accept the displayed values and return to Mode Parameters.

(CANCEL retains the previous settings and returns to Mode Parameters.)

NOTE: Freeze Mode is only available on

model HQCF45.

– 28 –