The Low-Pass Filter

The image sensor that acts as the camera’s picture element is fitted with a low-pass filter to prevent moiré. If you suspect that dirt or

dust on the filter is appearing in photographs, you can clean the filter using the Clean image sensor option in the setup menu. The filter can be cleaned at any time using the Clean now option, or

cleaning can be performed automatically when the camera is turned on or off.

❚❚“CleanNow”

1Place the camera base down.

Image sensor cleaning is most effective when the camera is placed base down as shown at right.

2 Display the Clean

Gbutton

image sensor menu.

 

Press Gto display the

menus. Highlight Clean image sensor in the setup

menu and press 2.

n

358

Page 384
Image 384
Nikon D300s, D300S (Body Only) Low-Pass Filter, Place the camera base down, Display the Clean, Image sensor menu, 358