Operating Your Pool Cleaner - Plugging the Cable
Plug Type
To plug the cable (Fig A) into the socket on the power supply (Fig. B), please do the following:
1.Prepare the plug as seen in (Fig. C) with the key and 3 outside slots exactly as shown.
2.Fit exactly the key and the slots from cable plug with the corresponding key and slots from the power supply socket. (Fig. D)
3.Push the plug all the way into the socket of the power supply.
4.Once the plug is in, rotate the plug to the right to lock it into place (Fig. E).
5.To remove the plug, first rotate the plug to the left to unlock it, then pull it out (Fig. F).
A |
cable |
plug |
B |
power supply |
socket |
C slot
key
cable
plug
D slot
key
power supply
socket
E
Push and rotate right to lock
F
Rotate left and pull to unlock
Socket (B) |
Cable plug (A) |
global.irobot.com 11
