GE JKP17, JKP18 A..~r Self-Cleaning, How to Set Delay Start of Cleaning, Quick Reminder, Stop

A..~r Self-Cleaning

You may notice some white ash in the oven. Just wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap- filled steel wool pad. Be sure to rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, repeat the cycle.

If the shelves become hard to slide, wipe the shelf supports with cooking oil.

NOTE: No functions can be programmed before the door automatically unlocks.

How to Set Delay Start of Cleaning

Quick Reminder:

1.Press the AUTO SELF CLEAN pad.

2.Press the INCREASE or DECREASE pad until the desired Clean Time appears.

3.Press the STOP TIME pad.

4.Press the INCREASE or DECREASE pad until the desired Stop Time appears in the display.

n	4. Press the STOP TIME pad.
STOP	“SET STOP TIME” and the earliest
‘~lME	Stop Time you can set will appear in
A	the display.

The earliest Stop Time will be the Clean Time ~elected plus the time of day. For examPle: 1f

the Clean Time is 3 hours and the time of day

is 6:00, the Stop Time that appears in the display will be 9:00.

Delay Start is setting the oven timer to start the clean cygle automatically at a later time than the present

t’ >f day.

Nu IE: Before beginning, make sure the oven clock shows the correct time of day.

1. Follow the directions in the Before a Clean Cycle section.

m 2. After t ‘ ~sing the door, press the

AUTO SELF AUTO SELF CLEAN pad.

CLEAN

A\	3. Press the INCREASE or DECREASE
	pad [o enter the Clean Time.

5.Press the INCREASE pad to change the Stop Time to a later time of day if desired. For example: If you set the

@Stop Time at 11:00, the oven will start

A

the clean cycle at 8:00 and end at

11 :00. The door latches automatically.

The self-clean cycle will automatically begin after “CLEAN” is displayed and the time for the clean cycle is set. The words “ON” and “LOCK” will appear in the display when the door automatically locks. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCK light goes off.

6. When the LOCK light is off, open the door.

NOTE:

●During a delayed self-clean operation you can find out when the oven is set to turn on by pressing and holding the AUTO SELF CLEAN pad for 3 seconds.

●A fan may automatically turn on and off to cool internal parts. This is normal and the fan may continue to run even after the oven is turned off.

31