Nikon D300S (Body Only) Sharing Custom Picture Controls, 163, Saving Custom Picture Controls

Sharing Custom Picture Controls

Custom Picture Controls created using the Picture Control Utility available with ViewNX or optional software such as Capture NX 2 can be copied to a memory card and loaded into the camera, or custom Picture Controls created with the camera can be copied to the memory card to be used in compatible cameras and software and then deleted when no longer needed (if two memory cards are inserted, the card in the primary slot will be used; 0 72).

To copy custom Picture Controls to or from the memory card, or to delete custom Picture

Controls from the memory card, highlight Load/Save in the Manage Picture Control

menu and press 2. The following options will be displayed:

•Copy to camera: Copy custom Picture Controls from the memory card to custom Picture Controls C-1 through C-9 on the camera and name them as desired.

•Delete from card: Delete selected custom Picture Controls from the

memory card. The confirmation
dialog shown at right will be
displayed before a Picture Control
is deleted; to delete the selected	J
Picture Control, highlight Yes and

press J.

•Copy to card: Copy a custom Picture Control (C-1 through C-9) from the camera to a selected destination (1 through 99) on the memory card.

ASaving Custom Picture Controls

Up to 99 custom Picture Controls can be stored on the memory card at any one time. The memory card can only be used to store user-created custom Picture Controls. The preset Picture Controls supplied with the camera can not be copied to the memory card, renamed, or deleted.

163