Panasonic WJ-ND400 manual General Specifications, Input/output

ND400_Basic.book 57 ページ ２００８年４月８日 火曜日 午後３時５９分

Specifications

WJ-ND400

●General Specifications

Power source	NTSC model: 120 V AC, 60 Hz
	PAL model: 220 V - 240 V AC, 50 Hz
Power consumption	170 W
Ambient operating	+5 ºC to +45 ºC {41 °F - 113 °F}
temperature
Ambient operating	5 % to 90 % (non condensing)
humidity
Maximum operating	2 000 m {6 562 feet} above sea level
altitude
Dimensions	430 mm (W) x 132 mm (H) x 400 mm (D) {16-15/16" (W) x 5-3/16" (H) x15-12/16" (D)}
	(excluding rubber feet and projections)
Weight	When 1 HDD is	14 kg {30.9 lbs}
	installed
	When 9 HDDs are	20 kg {44.15 lbs}
	installed

●HDD (One HDD is provided at the factory. Contact your dealer to purchase additional HDD.)

HDD	3.5" HDD x 1(Up to 9 HDDs)
Type/function	RAID5 mode available (only when 3 or more HDDs are installed)
	RAID6 mode available (only when 4 or more HDDs are installed)

● Input/output

External storage	High-speed serial interface, 1.5 Gbps (theoretical value), x5
Alarm/Control connector	Alarm input 8-16*1, Network error output*2, Alarm reset input*1,
	Emergency recording input*1, Available disk space warning output*2, HDD error output*2,
	Camera error output*2, Error output*2, Power outage recovery completion output*3, Time
	adjustment input/output*4, Alarm output*2,
	Alarm suspension input*1, Power outage detection input*1, External recording mode
	switching*1, +5 V output*5
	(D-sub 25-pin)
Alarm connector	Alarm input 1-7*1, Alarm input 17-32*1(D-sub 25-pin)
Client PC port	10BASE-T/100BASE-TX/1000BASE-T (RJ-45)
Camera port	10BASE-T/100BASE-TX/1000BASE-T (RJ-45)
Maintenance port	10BASE-T (RJ-45)

*1 No voltage make contact input +5 V pull-up, 150 kΩ

*2 Maximum output of open collector is DC 24 V, 100 mA

*3 High (+5 V to +12 V, max. 6.3 mA)

*4 52 kΩ +5-V pull-up, output current -100 mA, no voltage make contact input

*5 Max. 200 mA

57