![](/images/new-backgrounds/1125658/12565811x1.webp)
NOTES ON HANDLING:
• When shipping this unit, always use the original shipping carton and packing materials. For maximum protection, repack the unit as it was originally packed at the factory.
• Do not use volatile liquids, such as insect spray, near the player. Do not leave rubber or plastic products in contact with the DVD player for a long time. They will leave marks on the finish.
• The top and rear panels of the player may become warm after a long period of use. This is normal and not a malfunction.
• When the player is not in use, be sure to remove the disc and turn off the power.
• If you do not use the player for a long period, the unit may not function properly in the future. Turn on and use the player occasionally.
NOTES ON LOCATING THE UNIT:
• When you place this unit near another TV or a radio, the playback picture may become poor and the sound may be distorted. In this case, move the player away from the other TV or the radio.
NOTES ON CLEANING:
Use a soft, dry cloth for cleaning.
• For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinner and benzene, as they may damage the surface of the player.
• If you use a
Warning: Cleaning and adjustment of lenses and/or other components of playback mechanism should be performed by a qualified service technician.
TO OBTAIN A CLEAR PICTURE:
The DVD player is a high technology, precision device. If the optical
NOTES ON MOISTURE CONDENSATION: Moisture condensation damages this unit. Please read the following carefully.
• Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the optical
Moisture condensation occurs during the following cases:
• When you bring this unit directly from a cold place to a warm place.
• When you use this unit in a room where you just turned on the heater, or a place where the cold wind from the air conditioner directly hits the unit.
• In summer, when you use this unit in a hot and humid place just after you moved this unit from an air conditioned room.
• When you use this unit in a humid place.
Do not use this unit when moisture condensation may occur.
• If you use this unit in such a situation, it may damage discs and internal parts. Remove the disc, connect the power cord of this unit to the wall outlet, turn on this unit and leave it “ON” for two or three hours. After two or three hours, this unit will have warmed up and evaporated any moisture. Keep this unit connected to the wall outlet and moisture condensation will seldom occur.
AC CONNECTION |
|
Insert the small end of the AC adapter into the jack on the rear of the unit. Insert the other |
|
end (with the 2 blades) into a conveniently located AC outlet having 120V AC, 60Hz. |
|
AC ADAPTER SPECIFICATIONS: |
|
DC 12V Z |
|
NOTES: |
|
• To disconnect the AC adapter, remove it from the DC IN jack as well as from the AC |
|
outlet. | To DC 12V IN Jack |
• Use the enclosed AC adapter for this product only. |
5