CONNECTION USING AUDIO/VIDEO CABLES:
Follow the instructions below to connect an external unit, such as a VCR or second DVD player, to your unit using Audio/Video cables. (CABLES NOT INCLUDED.)
VCR (or second DVD) |
INCOMING CATV
CABLE (VCR)
From VCR OUT jacks
1.Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.
2.Connect the left and right audio cable from the external unit’s Audio OUT jacks to this unit’s AUDIO IN jacks. Connect the external unit’s Video OUT jack to this unit’s VIDEO IN jack.
3.Press the AUX button on the remote to select the auxiliary input (“AUX IN” will appear in the display) and press PLAY on the external unit.
Adjust the 8” TFT LCD screen as follows:
Push the area as shown in the step above and pull down the screen to a maximum of 180°.
12
Rotate the screen to a maximum viewing angle of 270°.
