ND400_Basic.book 10 ページ 2008年4月8日 火曜日 午後3時59分
zIndication label
Refer to the indication label placed on the surface of the unit as to the indications of equipment classification and power source, etc.
zHandle the unit with care.
Do not strike or shake, as this may damage the unit.
zDo not strike or give a strong shock to the unit. It may cause damage or allow water to enter the unit.
zPlace the unit horizontally on a level surface.
Do not place the unit in an upright position. When stacking multiple units, clear a space of more than 5 cm {1.97 "} from both sides, the top, the bottom and the rear of the units.
zAvoid placing receptacles that contain liquids such as water near the unit.
If liquid spills onto the unit, it may cause fire or an electric shock.
zPrevent condensation from forming on the surface of the hard disk.
If this happens, do not turn on the power of the recorder and leave the recorder for around 2 hours.
Wait until the dew evaporates in any of the following cases:
⋅The recorder is placed in an extremely humid place.
⋅The recorder is placed in a room where a heater has just been turned on.
⋅The recorder is moved from an
⋅When the unit has not been used for a certain period, turn on the power of the unit (approximately once a week), and perform recording/playback to prevent interferences with functions.
⋅We recommend that you make a note of your settings and save them. This will help when you are required to change the system configuration, or when unexpected trouble or failure occurs.
⋅Distributing, copying, disassembling, reverse compiling, reverse engineering, and also exporting in violation of export laws of the software provided with this product, is expressly prohibited.
zMPEG-4 Visual patent portfolio license
This product is licensed under the
zGPL/LGPL
⋅This product includes software based on GNU General Public License (GPL) and a Lesser General Public License (LGPL).
⋅Customers can duplicate, distribute, and modify the source code of the relevant software according to the GPL and LGPL.
⋅For detailed information about the relevant software, refer to the "readme.txt" file in the "GPL/LGPL" folder on the CD- ROM included with the main unit.
⋅Please note that Panasonic cannot respond to questions regarding the source code.
10