chap2.fm 19 ページ 2008年4月8日 火曜日 午後5時20分
Outline of Functions
Event operations include the following.
•Start recording images
Recording is done according to the recording duration and rate settings on the settings menu. The images from a camera before an event occurs can be recorded and linked to the event (pre- record event).
•Display alarm messages
A
•Alarm indicator blinks
Alarm indicator on the front of the recorder blinks.
•Buzzer sounds
The buzzer sounds according to the settings on the settings menu.
•The camera goes to its preset position.
The camera moves to a
•Notification email sent when event occurs
Alarm mail (notification of the time and date of an event) is sent to registered email addresses when an event occurs. An image can be attached to this email. Up to 4 addresses can be registered to receive the alarm mail.
•Alarm signal output from the Alarm/Control connector on the rear panel of the recorder (Alarm output)
When an event occurs, a signal is output from the Alarm connector on the rear panel of the recorder to sound an alarm etc.
•Event log is recorded.
When an event occurs, the type of event and the time it occurred are recorded in an event log.
•Images recorded during events are transmitted to an FTP server. When an event occurs, images are recorded from when the event starts for a set period of time and are automatically transmitted to an FTP server.
•A PC is notified of an alarm according to Panasonic alarm protocol settings.
When an event or error occurs, a PC is automatically notified regarding event or error information according to the [Panasonic alarm protocol] settings. Install the software (option) on the PC designated to receive and display event or error notification.
Refer to the "readme.txt" file on the
List of Functions
Live Monitoring
Function | Description |
|
|
Live images from cameras (including audio) are displayed on one screen. | |
| The camera can be operated from the recorder when one screen is displayed (refer to the Operating |
| Instructions (PDF file)). |
|
|
Live images from a camera are displayed on | |
|
|
Sequential display | Images from multiple cameras are shown in preset sequence on the screen. |
|
|
Recording
Function | Order of | Description | |
priority* | |||
|
| ||
|
|
| |
Emergency recording | 1 | Recording is done when an emergency occurs. | |
|
|
| |
Event post recording | 2 | Recording is automatically done after various events occur. | |
|
|
| |
Manual recording | 3 | Recording of images and audio can be started and stopped manually. | |
|
|
| |
Schedule recording | 4 | Recording is done automatically during a set time period. | |
|
|
| |
5 | Recording is automatically done before various events occur. | ||
|
|
|
* Order of priority: Images are recorded in the highest priority mode if more than one mode is enabled.
Setup Menu List
Refer to the Setup Instructions (PDF file) for information about the settings menu list.
19