chap3.fm 44 ページ ２００８年４月８日 火曜日 午後５時２１分
Using the Front Panel for Operations
HDD Unit
Use the HDD canister provided to install the HDD.
The HDDs can be easily installed or removed from the HDD slots inside the front cover.
Contact your dealer for information on purchasing, installing, and replacing HDDs.
HDD Canister | HDD |
Anti-static mat
Important:
•HDDs are precise devices. Before starting work, refer to "Hard disk drives (page 9)" for information on how to handle HDDs. Also, note the following precautions.
⋅Do not subject them to vibration or impact.
⋅To install HDDs, use a torque driver and tighten the screws to the specified torque.
⋅Before touching an HDD, ground yourself against a metal object to eliminate any static electricity. Always hold the HDDs by the sides when carrying them.
⋅Use an
⋅To prevent static electricity, do not touch the parts.
⋅At the time of purchase, the HDD unit and canisters are packaged in exclusive cushion.
The HDD units and canisters may be damaged by fall or vibration. When transporting the unit, remove these parts from the unit and package again.
1
2
Install the HDD into the special canister and use the four screws to fasten both sides of the HDD.
The torque for tightening the screws is 0.49 N•m (5 kgf•cm) (use a torque driver)
HDD fixing screws for HDD canister
HDD fixing screws for HDD canister
Use the two screws to fasten the bottom of the HDD.
The torque for tightening the screws is 0.49 N•m (5 kgf•cm) (use a torque driver)
HDD fixing screws for HDD canister
44
