ND400_Basic.book 14 ページ 2008年4月8日 火曜日 午後3時59分
Major Operating Controls and Their Functions
(5) HDD bay slots
Up to 9 HDD can be installed (one HDD unit is installed at the factory).
Note:
•Limiting factors for the RAID5/RAID6 mode.
RAID5 mode | : The RAID5 mode can be used when |
| more than three HDDs are installed. |
RAID6 mode | : The RAID6 mode can be used when |
| more than four HDDs are installed. |
|
|
(6) RAID mode switch [RAID]
Switches the HDD operational mode (Single, RAID5, or RAID6).
The settings become effective after setting the HDD operation mode with the [RAID] switch and turning on the power while holding down the [USE] button to boot up.
S | : SINGLE mode (default) |
R5 | : RAID5 mode |
R6 | : RAID6 mode |
Important:
•The HDD operation mode cannot be changed once the system is operating. Recorded data may not be read correctly when the mode is changed after the system is operating.
(7) Removal knob
Used when replacing the HDD units.
14