ND400_Basic.book 12 ページ ２００８年４月８日 火曜日 午後３時５９分
Major Operating Controls and Their Functions
Important:
•When the HDD indicators light red in the RAID5/RAID6 mode, quickly replace the HDD where the errors occurred. Contact your dealer for information on replacing HDDs.
⋅RAID5 mode:
Data cannot be recovered when two or more HDD indicators are lighting or blinking red.
⋅RAID6 mode:
Data cannot be recovered when three or more HDD indicators are lighting or blinking red.
HDD status indicator (left side)
Shows the operating status of the HDDs.
Lights green | : HDD power [On] |
| (HDD formatted) |
Blinks green | : HDD for playback only |
| (only for playback, recording not |
| possible) |
Blinks orange | : Formatting HDD |
Lights red | : HDD format failed |
Off | : HDD power [Off] |
| HDD is not connected or not |
| recognized |
(14) Escape button [ESC]
Use to return to the previous screen when doing operations on the LCD.
(15) Link indicators [LINK/ACT] Camera Link indicator [LINK/ACT1]
Lights or blinks when linked with camera.
Lights green
Blinks green
PC Link indicator [LINK/ACT2]
Lights or blinks when connected to a PC (PC and camera when one port used).
Lights green | : When a client PC port connection is |
| established |
Blinks green | : Receiving data |
Reserved Link indicator [LINK/ACT3]
This indicator is for future extension (off).
(16) Front cover
Open to add, or replace HDD units and to configure HDD operations (Single/RAID5/RAID6).
Keep it closed and locked during normal operations.
(7) Key hole
Use to open and close the front cover.
Keep the key in a safe place.
Lock | : Turn key to left |
Open | : Turn key to right |
(8) Maintenance port
Use for service when connected directly to a PC. Normally, it is not used.
Note:
•Use a straight cable to connect a PC directly to the maintenance port.
(9) | Recording indicator [REC] | |
| Lights | : Recording |
| Off | : Recording finished. |
(10) | Timer indicator [TIMER] | |
| Lights | : When a schedule is set |
| Blinks | : Schedule recording |
(11) | Operate indicator [OPERATE] | |
| Lights | : Power [On] |
| Off | : Power [Off] |
(12) | Arrow buttons (up, down, left, or right) | |
| Use to move the cursor on the LCD and for direct input of | |
| values. |
|
(13) | Set button [SET] | |
| Use to set items on the LCD. | |
12
