ND400_Basic.book 42 ページ 2008年4月8日 火曜日 午後3時59分
Using the Front Panel for Operations
Checking the IP Address
You can check the DHCP, IP address, subnet mask, gateway*, and HTTP port* for each port. The following ports are displayed: Camera port: PT
#1, Client PC port (PC port): PT #2, and the Maintenance port: PT#3. Use the arrow buttons (left or right) to switch between ports.
*Gateway and HTTP port settings are checked under the client PC port (PT #2). The following shows the initial default values for the recorder network settings.
Item | Camera port | Client PC port | Maintenance port |
|
|
|
|
DHCP | − | OFF | − |
|
|
|
|
IP address | 192.168.0.250 | 192.168.1.250 | 192.168.2.250 |
|
|
|
|
Subnet mask | 255.255.255.0 | 255.255.255.0 | 255.255.255.0 |
|
|
|
|
Gateway | − | 192.168.1.1 | − |
|
|
|
|
HTTP port | − | 80 | − |
|
|
|
|
Check the settings by switching between screens using the following operations.
The LCD changes as follows when using the arrow buttons (up or down).
[SET]
[ESC]
42