Nikon SB-28 instruction manual Flash settings, Set % on the LCD panel

Manual Flash ƒ Mode

For F5, F100, F90X/N90s, F90-Series/N90 only

Flash settings

4

5

Select the flash mode.

—Press the µ button until ƒ appears on the LCD panel.

Set % on the LCD panel.

—Press the { or } button until % appears on the LCD panel. The indicator bar ¡ on the LCD panel changes to show the shooting distance.

The indicator changes every time you press the } button:

1/1(0.0)

1/2(0.0)

1/2(-0.3)

1/2(-0.7)

1/4(0.0)

1/64(0.0)

%

The indicator changes every time you press the { button:

%

1/64(0.0)

1/64(+0.3)

1/64(+0.7)

1/32(0.0)

1/2(0.0)

1/1(0.0)

6Wait for the ready-light to come on and make sure the subject is in focus before taking the picture.

•A small amount of underexposure may result in a more pleasing photograph

by shooting a subject which is further to the right by 1 or 2 steps from the distance represented by the indicator bar ¡ on the LCD panel.

•If the flash-to-subject distance does not match the appropriate shooting distance shown by the indicator bar ¡, choose a different setting for the zoom-head position (smaller than the focal length of the lens in use) or move closer to or farther away from the subject.

50