Nikon SB-28 instruction manual Select a flash mode, Tilt and/or rotate the flash head

Page 59

Flash settings

3

Select a flash mode.

—Press the µ button until t or ˙ appears on the LCD panel.

4 Tilt and/or rotate the flash head.

—Depress the flash head tilting/rotating lock release button and tilt the flash head up at least 60° to bounce light off the ceiling.

If the angle of the flash head is not far enough off axis from the subject, uneven illumination will result from a combination of direct and bounced flash.

In color photography, select white or highly reflective surfaces to bounce light off of. Otherwise, your pictures will come out with an unnatural color cast similar to that of the reflecting surface.

59

Image 59
Contents SB-28 Determine which group your camera belongs to ForewordCamera groups and available flash modes Speedlight parts ˙ Non-TTL Auto Flash P.42 LCD panel indicationsUse only Nikon-approved equipment Tips on using this manualTake some test shots About this manual Denotes important points where caution is requiredContents Manual Flash ƒ Mode Two-button operations Using control buttonsOne-button operations Getting started Loading batteries Selecting the distance scale meters/feet Adjusting the flash headDetaching the SB-28 Attaching the SB-28 to the cameraStandby function Turning power on and offCanceling and setting the standby function Turning the SB-28 on and off / Standby functionReplace batteries Ready-light blinks when the flash fires at maximum outputReady-light Test firing Cameras in Groups III through Setting the ISO film speedCameras in Groups I Zoom head is automatically adjusted Adjusting the zoom-head positionOther camera/lens combinations Adjusting the zoom-head positionTo change to 18mm, press the button once Setting the built-in wide flash adapterIII Selecting a flash modeBasic operation Multi-Sensor Balanced Fill-Flash Flash modes3D Multi-Sensor Balanced Fill-Flash Standard TTL Flash Center-Weighted/Spot Fill-FlashMatrix Balanced Fill Flash Programmed TTL Auto FlashMonitor Preflash will not operate TTL Auto Flash t ModeAvailable flash operation in TTL Auto Flash t Mode Camera settingsSelect the flash mode Flash settingsReady-light blinks when the flash fires at maximum output TTL Auto Flash t ModeNikkor lenses without a built-in CPU Applicable to cameras in Groups INikkor lenses with a built-in CPU Guide number at ISO 100 for m/ft Available flash operation in TTL Auto Flash t Mode Check the shooting distance Select the flash modeFor cameras in Group III F-601/N6006, F-601M/N6000 Select the flash mode on the cameraFlash settings Press the µ button until t appears on the LCD panel With Nikkor lenses with a built-in CPU Page For F-401s/N4004s and F-401/N4004 For F-501/N2020 and F-301/N2000Flash shooting distance range TTL Auto Flash t Mode Flash settings Select the aperture Non-TTL Auto Flash ˙ ModeFor cameras in all groups Page Page Advanced operation Adjust the flash output level Manual Flash ƒ ModeSelect the exposure mode Number of continuous flashes at six frames per sec Manual Flash ƒ ModeSynchronization in continuous shooting in Manual ƒ mode Set the shutter speed Set the exposure mode to Manual M Set the apertureSet % on the LCD panel Detaching the SB-28 Adjustment factors for other ISO film speedsGuide numbers at ISO 100 for meters/feet Do not use the built-in wide flash adapterRepeating Flash Mode Maximum number of repeating flashes per frame Repeating Flash Mode Exposure compensation in Repeating Flash Mode To calculate the shooting distance To calculate the correct apertureFlash modes Applicable to all camera groups Bounce flash operationTilt and/or rotate the flash head Select a flash modeFlash head tilting and rotating angle Bounce flash operationSet the flash head as shown and take pictures Using the built-in bounce cardClose-up flash operation in TTL Auto Flash t Mode Set the flash mode Close-up flash operation in TTL Auto Flash t Mode Multiple flash operation in t and ƒ flash modes TTL multiple flash operation Attach the main flash unit to the camera’s accessory shoeSet the flash mode of the master flash unit to t mode Multiple flash operation in t and ƒ flash modesSU-4 Set the flash mode on all the flash units to tFor cameras in Groups I through VI, plus F3-Series cameras System chart for TTL multiple flashSecondary flash unit Usable optional remote cords Follow the same procedure as in normal Manual flash ƒ modeManual multiple flash operation For cameras in all groups Exposure compensation in flash photography Exposure compensation in flash photography Flash exposure compensation in TTL Auto Flash t modeSet the desired exposure compensation Canceling exposure compensationFlash exposure compensation in TTL Auto Flash t mode Flash exposure compensation in Manual Flash ƒ mode Flash exposure compensation in Non-TTL Auto Flash ˙ modeRed-eye reduction control Setting your camera to red-eye reductionRear-curtain flash sync Rear-curtain flash sync Additional information Checking the correct exposure For autofocus cameras only Autofocus flash operation in dim lightHold down the µ button as you press the button Autofocus flash operation in dim lightAccessories for multiple flash Optional accessoriesUsable sync cords Optional accessoriesConnecting the SB-28 to your camera using a sync cord Use only Nikon-approved external power sources Available external power sourcesUsing an external power source Tips on Speedlight care Page Page Troubleshooting Flash ready-light in the cameras viewfinder will blink TroubleshootingSpecifications ON/OFF SpecificationsExternal Type alkaline Number Batteries Min. recycling Approx g 11.3 oz ISO film speed Shooting distance range in feet
Related manuals
Manual 97 pages 25.96 Kb

SB-28 specifications

The Nikon SB-28 is a venerable speedlight flash that has become a classic among photography enthusiasts, particularly those using Nikon camera systems. Released in the late 1990s, the SB-28 has cemented its place in the hearts of photographers for its robust build quality, reliability, and impressive performance in a variety of shooting conditions.

One of the key features of the Nikon SB-28 is its guide number, which measures the flash output. With a guide number of 38 (in meters at ISO 100), the SB-28 provides ample power to illuminate subjects, even at a distance. This makes it particularly suited for both portrait and event photography where good lighting is essential. The flash also offers a versatile zoom head that can adjust from 24mm to 105mm, allowing photographers to focus the light precisely when required and improving efficiency in battery usage.

The SB-28 incorporates advanced technologies that enhance its usability. One notable feature is the TTL (Through The Lens) metering capability, which allows the flash to communicate with the camera to determine the appropriate exposure settings automatically. This feature significantly simplifies the process for photographers, enabling them to focus more on composition and creativity rather than on technical adjustments.

Another commendable aspect of the SB-28 is its built-in diffuser and bounce card. The diffuser softens the light and reduces harsh shadows, while the bounce card helps to reflect light into the eyes of subjects, giving them a more natural appearance. These features elevate the quality of the images produced, making the SB-28 a popular choice for wedding and portrait photographers.

Performance-wise, the Nikon SB-28 boasts a fast recycle time, allowing photographers to shoot at a rapid pace without significant delays between flashes. It also has a comprehensive range of flash modes, including manual and automatic settings, enabling users to tailor their lighting setup to their specific needs and shooting styles.

In terms of build, the Nikon SB-28 exhibits a sturdy and reliable construction, suitable for professional use. It is designed to withstand the rigors of daily use, with a weather-resistant design that offers protection against the elements.

In conclusion, the Nikon SB-28 is a powerful and versatile flash unit that combines advanced technology with practical features, making it a valuable tool for photographers aiming for optimal results in various lighting scenarios. Its robust performance and ease of use ensure that it remains a relevant choice even years after its initial release.