Oregon Scientific DS6888A If during the use happen that, Explanation and suggested solution

ENGLISH					ENGLISH
	If during the use happen that :			Picture already in memory will be kept.
			Explanation and suggested solution :
	•	Camera goes OFF.	•	Battery are discharge, please change.
	• Flash settled, but no work and goes OFF.		•	Battery are discharge, please change.
	•	Camera goes locked.	•	It might be caused by a too fast use of all the buttons,
				after making a photo. See below
	•	Camera is locked, with LED or LCD	•	Switch OFF the camera, wait for some seconds and	FRENCH
		display due to unexpected data error.		switch it ON; if the problem still exist please follow
	• “ALL” flashing to long time.			procedure as below:
	•	“Err” flashing.	•	Remove the batteries.
	•	Key are disable.	•	Remove the SmartMedia card (if any).
			•	Wait for approximately 30 seconds.
			•	Install two new batteries.
			•	Turn ON the camera and connect it to a TV by using
				the included video cable.
			•	Select ‘Delete All’ from TV ‘Main menu’. Camera	GERMAN
				will display “Frt” message, any key must not be
				pressed during this procedure, wait completion until
				TV and camera will return back to the ‘Main menu’.
			•	Turn OFF the camera and unplug the video cable
				from TV.
			•	Install the SmartMedia card (if any).
			•	Turn the camera on and it can now resume to normal
				operation.
	•	Photos number and LED flashing.	•	This is normal, the camera is busy because the	ITALIAN
	• After a quick use of the shutter (a lot			previous taken photos are going to be stored into
		of pictures in a short time) the "bsy"		the camera; wait few seconds before making others
		message appear at next.		photo, till the LED and the progressive (or regressive)
				number stop to flashing.
					SPANISH

16

PORTUGUESE