Haan SI-35 user manual 1Ultra-Microfibercleaning cloth is too wet

HELPFUL HAAN HINT: For optimal performance, the Ultra-Microfiber pad should be changed after 10 minutes of use.

PROBLEM: Floor Sanitizer leaves water on the floor.

Possible Cause:

1)Ultra-Microfiber cleaning cloth is too wet.

2)Unit is not level on the floor..

Possible Solution:

1)Turn off unit, unplug from power outlet and change the Ultra-Microfiber pad.

2)Always keep the floor sanitizer level and parallel to the floor.

PROBLEM: Floor Sanitizer left a white spot on the floor.

Possible Cause:

1)Floor sanitizer left in one spot too long.

2)Floor sanitizer not rested on floor protector pad.

3)Hard water.

Possible Solution:

1)Always place the floor sanitizer on the floor protector pad when not in use.

2)Use distilled water.

NOTE: To remove spot, use a damp, dry cloth with a few drops of white vinegar and rub the stain to remove spot.

?Question: Can the HAAN floor sanitizer be used on laminate flooring?

The HAAN floor sanitizer was designed for use on sensitive flooring like laminates. We’ve spent years optimizing the steam emission so that at nearly half the wattage of competitive products (ours is only 800w versus most that are 1500w), we still emit steam at 212˚F. This means our finer vapor-like steam is gentler than those that simply blast 1500w of water and steam onto your floor. Yet, the HANN is more effective at penetrating stains and killing harmful germs and bacteria than competitors. Steam is all we do, and we’ve spent years perfecting it.

www. haanusa . com 877 - HAAN DIRECT / 877 - 422 - 6347 pg 15